estimate for supply erection & commissioning of various electromechanical equipment like vt pump, electric motors, ltbb panel and other allied material for flood protection works in gujrani water services mechanical sub division, bhiwanifor the year 2023-24-- 1 supply, erection and commissioning of 10 cs. v.t. axial flow pumps of 1440 rpm, having static lift of 6 mtr., including delivery pipe (6+6 mtr.) and ms delivery bends of minimum 8 mm thickness with bituminous based paint inside and outside including flange welding, h.t. nut-bolts, complete in all respect, as per site and as per approved technical specifications.(premnager drain, gujrani drain, lohani drain, sukhpuramundhal drain). 2 supply, erection and commissioning of 5 cs. v.t. axial flow pumps of 1440 rpm, having static lift of 6 mtr., including delivery pipe (6+6 mtr.) and ms delivery bends of minimum 8 mm thickness with bituminous based paint inside and outside including flange welding, h.t. nut-bolts, complete in all respect, as per site and as per approved technical specifications.(premnager drain, lohani drain, sukhpuramundhal drain, rd 11500 nigana feeder, saimandhanana drain). 3 supply, erection and commissioning of solid shaft motor of capacity 50 hp, 1440 rpm, 3 phase 415 volt with efficiency class ie2 (as per is 12615 with latest amendments) suitable for 10 cs. vt axial flow pumps with 6 mtr.lift type verticalflange mounted & as per approved technical specifications with earthing of motor. 4 supply, erection and commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase 415 volt with efficiency class ie2 (as per is 12615 with latest amendments) suitable for 5 cs. vt axial flow pumps with 6 mtr. lift type verticalflange mounted & as per approved technical specifications with earthing of motor. 5 supply, erection and commissioning of 50hp fully automatic ats starter with mccb of 250 amp. capacity with all accessories along with an-addl. mccb of 63 amp. for lighting loads, indicators, relay, meters, push buttons, bus bars, timers etc. with contactor rating as 110, 80, 50 amp. with first filling of oil (if oil cooled ats used) starter should have individual capacitor bank of 25 kvar capacity coupled through 63 amp. mccb and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of ms channel (1feet up from floor) with latest amendments suitable for 10 cs. axial flow pumps and as per approved technical specifications with earthing. 6 supply, erection and commissioning of 60hp fully automatic ats starter with mccb of 250 amp. capacity with all accessories along with an-addl. mccb of 63 amp. for lighting loads, indicators, relay, meters, push buttons, bus bars, timers etc. with contactor rating as 110, 80, 50 amp. with first filling of oil (if oil cooled ats used) starter should have individual capacitor bank of 25 kvar capacity coupled through 63 amp. mccb and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of ms channel (1feet up from floor) with latest amendments suitable for 10 cs. axial flow pumps and as per approved technical specifications with earthing. 7 supply, erection and commissioning of 30hp fully automatic ats starter with mccb of 160 amp. capacity with all accessories along with an-addl. mccb of 63 amp. for lighting loads, indicators, relay, meters, push buttons, bus bars, timers etc. with contactor rating as 110, 80, 40 amp. with first filling of oil (if oil cooled ats used) starter should have individual capacitor bank of 16 kvar capacity coupled through 63 amp. mccb and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of ms channel (1feet up from floor) with latest amendments suitable for 5 cs. axial flow pumps and as per approved technical specifications with earthing. 8 supply, erection and commissioning of m.s delivery pipes 258.9 mm inner diameter (in approx 6 mtr. per pipe) and each pipe of 8 mm thickness both end welded with flange made ms plate as per approved specification & make. (including ht nut & bolt, rubber sheet 1/8 & other fitment accessory required (various sites). 9 supply, erection and commissioning of ms girder – parallel flange section (conforming to is808:2021) size ismb 200 x 100 with primer and bituminous based paint inside & outside. 10 providing & laying of lt unarmoured pvc aluminium conductor cable of size 95 sq. mm, 3.5 core conforming to is 7098 -1985 as per approved makes.