tender for erode district kilambadi town panchayat integrated child development scheme 2023 2024.; 1 earth work excavation for foundation complying with reference clause of tnss well sinking with in the initial lead of 10 mtr and initial lift of 2 mtrin hard stiff clay, stiff block cotton , hard red earth, shallsmurram earth mixed with small size boulders including all other labour charges etc., complete as per std., specification 2 plain cement concrete 1:4:8 mix ( one part cement, four part sand and eight part of aggrigate ) using 40 mm size iss hbg metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. laying and curing etc., complete. complying with std., specifications. 3 random rubble masontry in cm 1:5 mix using rough stone and bond stone with necessary poing including cost of mateirals and all labour charges etc., with standard specification. 4 painting two coats with approved emulsionover one priming coat of emulsion overcement plasteredwall surface and ceiling including cleaning preparing the surface and curing etc. complete complying with standard specifications 5 painting two coats with best approved enamel paint for new iron work including cost and conveyance etc., complete. 6 paving the floor with ceramic tiles of approved make and quality with plain / colour in cm 1:3, 20mm thick and pinting with white cement including finishing jointing and polishing with glossy finish etc., complete. 7 brick work in cm 1:5mix using country bricks ground molded of size 23 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. 8 plastering with cm 1:5, 12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. 9 plastering with cm 1:5, 20mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. 10 supplying and fixing of m.s.grill truss, purlinsof approved design for doors. windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standared specifications. 11 supply, delivery and fixing of best approved quality of corrugated galvanised sheet with 0.80 mm thick confirm to is code with j bolt nuts, bitumen washer including cost and conveyance of all materials and labour charges etc., complete as per standard specifications.