providing paver block road at sathiyan medu aadhithiravidar colony 2nd street in pudur ( s ) town panchayat. , earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils ( ss 20 b ) etc., complete as per standard specification - 1m3 for drainage , plain cement concrete using1:4:8 mix ( one cement , four sand and eight aggregates ) using 40 mm iss hbg metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc complete as per the standard specifications. tndss no: 28 v, vi ( s2 ) v, vi ( s5a ) vii , supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as rcc slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with ms angles of size 25mm x 25mm x 3mm laid over silver oak ( cw ) joists of size 10cm x 6cm spaced upto 90cm c / c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c / c complying with standard specifications as per tndss no : 30 & 86. , plain cement concrete 1:3:6 mix ( one part cement, three part m- sand and six part of aggrigate ) using 20 mm size iss hbg metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. laying and curing etc., complete as per tndss no: 28 & vi ( s2 ) vi ( s5a ) vii standard specifications as directed by engineer incharge. , providing and laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the materials with water at omc in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth , providing and laying of 83mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 n / mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.-10 sqm