tender for maintenance of anganwadi center atputhusuripalayamin nambiyur town panchyat. ; 1 dismantling pressed tiles & weathering courseincluding curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification 2 dismantlingplain cement concreteincluding curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification 3 cement concrete 1:4:8 mix ( one cement four m sand and eight aggregate ) using 40mm iss metal including cost and conveyance of all materials to site and all labour charges including mixing, laying consolidating andcuring etc., complete as per standard specification - 10m³ 4 supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as rcc slabs rectangular beams all beams lintels etc. centering for soffits of rcc slabs plain surface including strutting upto 3 meter height using mild steel sheet of size 90cmx60cmx10 gauge with ms angles of size 25mmx2mmx3mm laid over silver oak ( cw ) joists of size 10cmx6cm spaced upto 90cm c / c and supported casurina props or 10cm to 13cm dia spaced at 0.750cm c / c complying with standard specification and as directed by the departmental officer 5 supplying and fabrication of steel and placing in position ms / ribbed tor steel grills for rcc works as per design given including cost of steel and gi binding wire in floors etc., complete complying with standard specification in force per kilogram. 6 reinforced cement concrete 1:1½:3 mix using 20mm iss metal ( one cementone and half sand and three aggregate ) from the approved quarry including mixing, laying, consolidating curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification 7 plastering with cement mortar 1:3 ( one cement and three sand ) 10 mm thickincluding cost and conveyance of all materials to site including curing etc., complete as per standard specification – 10m2 8 plastering with cement mortar 1:5 mix to 20mm thick including cost and conveyance of all materials to site including curing etc., complete as per standard specification – 10m2 9 supply and fixing of followingl angle truss including cost of material conveyance of all material, fabrication and fixing charges etc.completeas per isi with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. complete as directed by the departmental officer. 10 fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. the materials should be of ppgi tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. the sheet should be g.i.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer.the washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of z 120 gsm paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. the sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. 11 paving the floor with descrgned coloured vitrified tiles of size 600 x 600 x 8mm of best quality and approved variety complying / confirming isi specification land over cement mortar 1:3 ( one cement and three sand ) 20mm thick and pomted with same coloured cement neatly etc., complete. 12 painting two coats with best approved quality of enamel paint over one coat of priming for new iron work including all labour charges etc., complete as per standard specification 13 painting two coats ready mixed approved exteriar emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best cement paintas directed by the department officers etc completeand including necessary plaster of paris whever regd. ( s.l.no.358 ) -10sqm