tender for providing park at ward no.10, sf.no.7 / 130, 131 golden nagar in kariapatti town panchayat.; 1 earth work excavation in all soils for foundation except hard rock requiring blasting with an initial lead of 10m and lift of 2m and depositing earth on bank for refilling asdirected by department offices etc., complete as per standard specification 23 &24 v, vi ( s2 ) vi 9 2 plain cement concrete 1:4:8 ( one part of cement, four part ofm.sand, eight part of aggregate ) mix using 40mm iss hbg metal from approved quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete and other incidental charges etc., complete.as per standard specification 28 v, vi s25 3 supply and erection of steel centering, shuttering for soffits and sides including necessary support strutting for all rcc works using ms sheets of suitable size of bg 10 stiffened with ms angle of size 25x25x3mm for boarding laid over silver oak joists of size 10cmx6.5cm space at 10cm c / cand supported by casurino prop 10cm-13cm spaced at 75cm c / c etc., complete and as directed by departmental officers. ss 86 & 86a v, vi, vii ( s6 ) 7, 328 v, vi s25 4 1 ) shuttering 5 2 ) plain surface 6 vibrated plain cement concrete 1:2:4 mix, ( one part of cement, two part part of m.sand and four part of aggregate ) mix using 20mm iss hbg metal from approved quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete and other incidental charges to site etc., complete.as per standard specification 28 v, vi s25 7 vibrated reinforced cement concrete 1:1.5:3 mix, ( one part of cement, one and half part ofm.sand and three part of aggregate ) mix using 20mm iss hbg metal from approved quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete and other incidental charges to site etc., complete.as per standard specification 28 v, vi s25 8 supply and fabrication of steel using tmt rodsfor all reinforced cement concreteworks including cost and conveyance of all materials and all labour charges for cutting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete.as per standard specification ss 86 & 86a v, vi, vii ( s6 ) 7, 3 9 brick work in cement mortor 1:5 mix ( one cement, five m.sand ) using new best ii class bricks of size 8” 3 / 4x 4 1 / 4 “x 2 3 / 4 ”from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications 10 plastering in c.m. 1:5 mix ( one part of cement and five part of m.sand ) 12mm tk including mixing and finishing to a well smoothened surface, watering cost and conveyance all materials and all labour and other incidental charges and other incidental charges etc., complete.as per standard specification tnbpss 56, 57 11 providing and laying, spreading and compacting graded stone aggregates to wet mix macadam 150mm thick specification including premixing the materials with water at omc in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth 12 providing and laying of 63 mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 n / mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification. 13 paving the floor with granite slabs ( super fine polished with machine cut edges ) of approved quality and colour of size 4 x 2 and above 18 mm to 20 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 ( one cement three m.sand ) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg / m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.the colour & quality of tiles should be got approved by engineer before use on work 14 supply and fixing ofsteel gateof approved quality using isa sections including cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification 15 supplying and painting the walls with two coats weather sealed exterior emulsion paint as instructed by the departmental officers including preparation of surface curing etc., copmlete in all floors complying with standard specification ( the colour and shade of paint shall be got approved the departmental officers ) 16 painting two coats with enamelpaint of approved colour and quality including cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification 17 providing steel tamil letters of size 25 cm of approvedquality including cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification 18 drilling of 150 mm dia bore well in hard rock area to any required depth as decided by the departmental officers including transportation from one place to anothr place with in tamilnadu state by direct method using contractors rig toolsat the site shown by the departmental officersincluding cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification 19 supply and erection of 180 mm dia pvc casing pipeof approved quality to require depth including cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification 20 supply and deleivery ofsingle phase submersible pumpset for bore well with isi mark is 8034 / 2002 with panel board of 1.50 hp of duty condition 20 lpm x 150 m etc complete as per standard specification sl.no3.1 ( 78. ) 21 supply and delivery and fixing ofhdpe tank of 1000 litre capasityas per is112701 / 1996 inculding, unloading, transportation and labour charges for fixing of the gi pipes and specials for pipe connection works inculding cutting, threading and fixing charges etc., complete 22 supply and delivery of gipipes and pipes specials including all charges etc., complete 23 25mm upvc pipe 24 25 mm gi coupling ( havey ) 25 25 mm gibend 26 25 mm gm gatevalue 27 25mm gi union 28 ms bore cover 29 ms clamp set 30 2.5 sqmm 3 core flat cable 31 25 mm nr valve 32 laboar charges for the erection of submersible pumpset in borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpicn switches starter, voltmeter, ammeter, three pilot ( indicating ) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per ie rules etc., complete and testing the pumpset and trail run for 10 days 33 supplying and filling in foundation with filling well gravel in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. 34 supplying and fixing of following children play equipment at park including cost and convence of all materials and labour charge etc., complete. 35 four seated see - saw manufacturing, supply and erection of fourt seated see - saw of size 2.10 mt long and 1.5mt width supporting with 35mm dia of c.r. pipe of b class thickness and 4 nos. of seat arrangements, one safety back rest up & down movement will controlled by heavy duty bearing mounting including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete 36 frp double sidemanufacturing, supply and erection of frp double slide of sliding lengh 2.1 heigh 1.82m & width 508 mm made of 63.5mm, 55mm, 35mm, 25mm b class cr pipe, the sliding area made by s.s sheet 2 nos. including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete 37 four ss seated swingmanufacturing, supply and ereciton of fourt seated seated swing made of 50mm, 63.50mm s.s. pipe.dimensions hight 3.048 meter, length 6.096 meters.tested bearing supported molded chains with attractive colors.seating arrangments made by gi sheet including one coat of anit rust expoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., completed