bids are invited for boq total quantity : 1---1 fuse wire 200amp kg 5 4704.00 fuse material: tinned copper rated current of fuse wire: 200 amp fuse wire shall be circular and shall have uniform crosssection. 2 fuse wire 60 amp kg 5 4704.00 fuse material: tinned copper rated current of fuse wire: 60 amp fuse wire shall be circular and shall have uniform crosssection. 3 h.t. stay complete set with accessories nos 30 33984.00 with 7 / 10 swg gi stay wire, 140x85 mm ht guy insulator, 18 mm dia stay rod, 1.8 m long with bow thimble, turn buckle and 300x300x6 mm anchor plate 4 gi heavy duty ball and socket hardware fitting for 33kv / 11kv transmission line nos 140 83328.00 suitable for upto 33 kv, 3 phase system, breaking load: not less than 70 kn, suitable for dog conductor, material for ball and socket should be of forged steel / aluminium alloy, hot dip galvanized. 5 gang operatd air breaker switch 33kv 400amp, 3 pole set 10 251520.00 rated voltage: 33 kv rated current: 400 a type: 3 pole bushings: porcelein / polymer type 6 female contact of 11 kv go switch nos 25 12000.00 rated current: 400 a type: single pole material: brass suitable for 6.6 kv ( phase-earth ) 7 drop out fuse 11k.v. nos 5 25363.00 voltage: 11 kv ( 6.6 kv phase-earth ) housing: porcelain / polymer insulator phase: three phase frequency: 50 hz 8 pg clamp dog to dog conductor nos 150 16320.00 usage / application: industrial, commercial material: alluminium alloy forged suitable for: acsr dog conductor finishing type: polished 9 tension clamp for overhead line nos 300 113280.00 tension clamp shall be three bolted type and minimum 01 no. keeper the material for tension clamps and keeper should be high strength alluminium alloy, tension clamp shall be fitted with revet, flat washer, cotter pin, u bolt & nuts & spring washer, tension clamp should not be less than 45 kn for acsr dog conductor. slip strength should not be less than 95% uts of the dog conductor. 10 mid span jointing sleeves for dog conductor