bids are invited for etp - design, supply, installation, testing, commissioning (dsitc) and validation of packaged type effluent treatment plant of non-corrosive material. rcc/ms components with corrosive protection, including design shop drawing and obtain the concent to establishment and concent to operate from hspcb, erection, commissioning, construction of etp including civil, mechanical, electrical, piping work complete in all respect on turnkey basis. the system should be fully automatic with level control, compact, odor free and shall consume low power/energy efficient. etp of suitable size for 25 kld required to treat the effluent of lab by using suitable technology complete in all respect including flash mixer/settler/neutralization chamber, holding tank including multigrade filter standby motor pumps, blower, uv, etc. pumps and piping filter sludge holding tank, filter press, testing kit, electrical panel, air blower, equalization tank, /holding tank. agency has to monitor the lab waste effluent for for various parameter and quantity obtaining desired no of test reports of raw treated lab effluent. the etp units shall be designed in such a way that the aqueous effluent does not effect the function of stp when treated aqueous effluent mixed in the domestic sewer line. treated effluent shall meet the hspcb norms & also obtain adequacy report & treated effluent test report for hspcb. agency has to maintain and operate the etp (round the clock i.e. 24 x 07 for 12 months) during defect liability period including cost of manpower, chemical etc. except electricity cost. proposed location of the system will be above stp. total quantity : 1