bids are invited for electrodynamic shaker - 1000kgf peak sine, frequency 2 hz to 3000 hz, displacement 30 mm, bare table acceleration 50`g’ sine, auto centering,power amplifier, cooling system, vibration controller, signal generator (standard and user defined), connectors and base plate 500 x 500 mm. , single axis accelerometers - icp type accelerometers upto 16 g vertical acceleration and workable frequency range upto 5000 hz. , tri axial accelerometers - 50 g acceleration limit, should come with mounting studs, with sensitivity of atleast 100 mv/g or above along with 10 ft. bnc cable or longer. , impact hammer - 80-100 lbf range with a sensitivity of atleast 50 mv/lbf. should come with bnc connector with additional impact tips and teflon jacket. , vehicle data acquisition system - atleast 1000hz data logging system with inbuilt gyro sensor for measuring roll, pitch and yaw rates. should have atleast 4 analog input channels and four channels to measure frequency inputs (typical wheel speeds coming from the encoders). , vibration data logger - 8 analog inputs, differential measurement inputs, voltage and current signals with a sampling rate of atleast 100 khz and 5 khz band width per channel. should be able to measure both voltage and current signals and come with an inbuilt voltage sensor supply along with memory card for data logging. , wheel speed encoder - wheel pulse transducer for measuring wheel speeds. should have ip67 protection; 5-15v dc supply and come with universal mounting assembly compatible with wheels of different sizes. , steering measuring wheel - steering wheel for measuring steering torques upto 50 n-m in addition to the steering angle and angular rate. should come with a universal mounting compatible with steering wheels of different sizes. , computer - the system should be supplied with an all in one pc, intel i5 processor, windows 10, 8gb ram or better. total quantity : 1