bids are invited for item no 1 - angle iron 65x65x6mm for fencing post of height 2.85 mtr with angular arm fence post making 05 nos 15mm dia holes at a distance of400mm centre to centre starting 500mm from the bottom.make: tata/sail/rinl/jindal , item no 2 - angle iron 65x65x6mm for fencing post of height 2.85 mtr withangular armfence post making 05 nos 15mm dia holes at a distance of 400mm centre to centre starting 500mm from bottom and making 02 nos 15mm dia holes at a distance of 1200 mm and 1300 mm from bottom on inner side (total 07 holes).make: tata/sail/rinl/jindal , item no 3 - ms flat 50x5mm of 1.80 m height making 05 nos 15mm dia holes at a distance of 400 mm centre to centre starting 100mm from bottom.make: tata/sail/rinl/jindal , item no 4 - ms flat 50x5mm ofmaking 15 mm dia holes at a distance of 3.00 mtr centre to centre.make: tata/sail/rinl/jindal , item no 5 - angle iron 50x50x6mm for strut post of height 2.35 mtr making 02 nos 15mm dia holes at a distance of 100mm centre to centre starting 50mm from top.make: tata/sail/rinl/jindal , item no 6 - two strand of barbed wire made out of gi wire of size 2.24mm dia barbed with 2mm dia barbs at 75mm spacings having minimum wt 0.097 kg/mtr.sail/rinl/jindal/tata wiron , item no 7 - chain link fence with dia of wire 4 mm and size of mesh 100mm x 100mm. sail/rinl/jindal/tata wiron , item no 8 - binding wire 0.9mm dia. , item no 9 - 12 mm dia50mm long bolts with nuts & 02 x washers for each set. , item no 10 - mild steeel bars tmtbars above 8 mm dia and upto 16 mm dia cut to length , bent to shape required, inluding bendind spirally for hoopingfor columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips quality conforming to fe-410w 9gde e-250) . , item no 11 - commercial plywood 6 x 3 x 12 mm. , item no 12 - nails all type 1to 6 long. , item no 13 - primer red oxide as per as per is-8982 make: asian/shalimar/ berger/ nerolac. , item no