bids are invited for 1 scope of work scope of work.pre-fabricated steel pd of size 2.75x 2.75x2.0m as per drawings and specifications are as per uploaded pdf file. 2 stores ( 1 ) portland pozolanacement ( ppc ) 43 grade as per ( is-8041-1990 ) packed in 50 kgs hdpe bags conforming to is 11652 / 2000 make:ultra tech / ambuja / acc / india cement. 3 stores ( 2 ) fine sand shall be clean, sharp, angular hard and durable free from adherent coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970. 4 stores ( 3 ) stone aggregate shall be crushed stone 20mm graded conforming to is-383-1970 and shall be clean hard tough, durable and of uniform quality through out. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. 5 stores ( 4 ) stone aggregate shall be crushed stone 40mm graded conforming to is-383 1970 and shall be clean hard tough, durable and of uniform quality through out. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. 6 stores ( 5 ) pre painted galvalume sheet 0.63mm tick green colour 6 long 3 wide are used in making roof confiring to is 14246-1995, make: tata / jindal 7 stores ( 6 ) angle iron ( as specified in tspt -iii ) .make : sail / tata / jindal 8 stores ( 7 ) ms sheet ( as specification intspt - iii ) 9 stores ( 8 ) ms plateform for spl wpn ( 20kg ) 10 stores ( 9 ) ismb 150 x 75mm. make : tata / sail / jindal 11 stores ( 10 ) srt 1750x613x180 12 stores ( 11 ) ms flat iron ( as specified in tspt-iii ) 13 stores ( 12 ) ms washer 14 stores ( 13 ) sand bag 15 stores ( 14 ) pbs roll 16 stores ( 15 ) welding rod 17 stores ( 16 ) paint red oxide, make :shalimar / berger / asian 18 stores ( 17 ) paint og enemal, make : shalimar / berger / asian 19 stores ( 18 ) turpentine oil 20 stores ( 19 ) paint anticorrisive make :shalimar / berger / asian 21 stores ( 20 ) pcc block, 100mm thick as per specification 22 stores ( 21 ) nut bolts 23 stores ( 22 ) wooden planks 20mm thick 2ndclass hard wood and wooden runner of size 38 x 38mm of 2nd class hard wood with beading. make : sangwan / kiker a grade 24 stores ( 23 ) drill bits 25 stores ( 24 ) fabrication charges 26 stores ( 25 ) ms tube, 32mm nominal dia, med gde 27 stores ( 26 ) bitumenous primer 28 stores ( 27 ) anti-termite liquid 29 stores ( 28 ) thinner 30 stores ( 29 ) wooden primer 31 stores ( 30 ) binding wire, 0.9mm dia 32 stores ( 31 ) materials. all steel provided provided for the work shall confirm to is 226-1975 for structural steel and 277-1992 for ms sheet. welding of panel shall be fillet and butt welding for angle / sheet joint as per is 816-1980.