bids are invited for tibia nail8 x 34 mm, - 14* high herzog bend , guide wire hole at band , distal three proximal 2 hole , proximal diameter of 12 mm , dynamic hole of 10mm, distel hole spacing 11mm. dealer must be iso certified ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , tibia nail8 x 36 mm - 14* high herzog bend , guide wire hole at band , distal three proximal 2 hole , proximal diameter of 12 mm , dynamic hole of 10mm, distel hole spacing 11mm. dealer must be iso certified ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , tibia nail8 x 38 mm - 14* high herzog bend , guide wire hole at band , distal three proximal 2 hole , proximal diameter of 12 mm , dynamic hole of 10mm, distel hole spacing 11mm. dealer must be iso certified ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , tibia nail10 x 34 mm - 14* high herzog bend , guide wire hole at band , distal three proximal 2 hole , proximal diameter of 12 mm , dynamic hole of 10mm, distel hole spacing 11mm. dealer must be iso certified ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , tibia nail10 x 36 mm - 14* high herzog bend , guide wire hole at band , distal three proximal 2 hole , proximal diameter of 12 mm , dynamic hole of 10mm, distel hole spacing 11mm. dealer must be iso certified ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 8 x 285 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 8 x 300 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 8 x 315 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 8 x 330 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 8 x 345 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 8 x 360 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 285 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 300 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 315 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 330 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 345 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 360 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 9 x 380 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 285 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 300 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 315 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 330 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 345 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 360 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , expert tibia nail 10 x 380 mm - anatomic bend curvature , must have different locking options, at distale end two ml & 1 ap and one is oblique hole , nail must have two ml locking at proximal which enable primary compresson or secondary controlled dynamisation , dynamic hole of 10 mm. also having three proximal locking options in 45* conversing and one ap oblique hole no herzog and design.dealer must be iso certified, dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , femur nail 9 x 38 mm - femur nail must accept 4.9 mm lb as well as 5 mm locking screw, 3 / 8 unf , nail must permit 5 mm controlled axial dynamization , nail is bent at 1.5 m radius of curvature with dynamic hole & four locking options.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , femur nail 9 x 40 mm - femur nail must accept 4.9 mm lb as well as 5 mm locking screw, 3 / 8 unf , nail must permit 5 mm controlled axial dynamization , nail is bent at 1.5 m radius of curvature with dynamic hole & four locking options.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , femur nail 9 x 42 mm - femur nail must accept 4.9 mm lb as well as 5 mm locking screw, 3 / 8 unf , nail must permit 5 mm controlled axial dynamization , nail is bent at 1.5 m radius of curvature with dynamic hole & four locking options.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , femur nail 10 x 40 mm - femur nail must accept 4.9 mm lb as well as 5 mm locking screw, 3 / 8 unf , nail must permit 5 mm controlled axial dynamization , nail is bent at 1.5 m radius of curvature with dynamic hole & four locking options.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , femur nail 11 x 38 mm - femur nail must accept 4.9 mm lb as well as 5 mm locking screw, 3 / 8 unf , nail must permit 5 mm controlled axial dynamization , nail is bent at 1.5 m radius of curvature with dynamic hole & four locking options.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , vollar plate 3 hole - 3.5 mm design in which combi hole in shaft for dynamic compression and locking screws that provide angular stability of fixed anatomic angle , plate should have 3 screw option in head , should have 3 k wire hole and shaft design should be 1 / 3 tubular type.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , vollar plate 4 hole - 3.5 mm design in which combi hole in shaft for dynamic compression and locking screws that provide angular stability of fixed anatomic angle , plate should have 3 screw option in head , should have 3 k wire hole and shaft design should be 1 / 3 tubular type.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , vollar plate 5 hole - 3.5 mm design in which combi hole in shaft for dynamic compression and locking screws that provide angular stability of fixed anatomic angle , plate should have 3 screw option in head , should have 3 k wire hole and shaft design should be 1 / 3 tubular type.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , clavicle plate 8 hole right - superior anterior clavicle plate, anatomical precontoured, angularly stable should have tapered plate tip that can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior & anterior twist both end k wire holes. dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension right 3 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension right 4 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension right 5 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension right 6 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension right 7 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension right 8 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension left 3 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension left 4 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension left 5 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension left 6 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension left 7 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , superior anterior clavicle plates, with lateral extension left 8 hole - superior anterior clavicle plates, with lateral extension anatomical precontoured, angularly stable should have tapered plate, tip can be inserted percutaneously, allow contouring , twisted design should combine advantages of superior and antero-inferior plating. 2.7 mm locking should have different angle of locking screw holes. temporary k wire fixation holes should be there.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , 3.5 mm l c -dcp plate 6 hole - low contact dynamic compression plate to eliminate reduced impairment of periosteal blood flow to avoid shear force which will lead to loss of reduction.tapered tip end on both side with k wire holes at both ends, opposite direction holes from the centre.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , 3.5 mm l c -dcp plate 7 hole - low contact dynamic compression plate to eliminate reduced impairment of periosteal blood flow to avoid shear force which will lead to loss of reduction.tapered tip end on both side with k wire holes at both ends, opposite direction holes from the centre.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , 3.5 mm l c -dcp plate 8 hole - low contact dynamic compression plate to eliminate reduced impairment of periosteal blood flow to avoid shear force which will lead to loss of reduction.tapered tip end on both side with k wire holes at both ends, opposite direction holes from the centre.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) , 3.5 mm l c -dcp plate 9 hole - low contact dynamic compression plate to eliminate reduced impairment of periosteal blood flow to avoid shear force which will lead to loss of reduction.tapered tip end on both side with k wire holes at both ends, opposite direction holes from the centre.dealer must be iso certified. ( productmust be certified ufda , ce, iso, iec, zed certificate gold ) total quantity : 1