bids are invited for flp motor local control station for p6001 motors - flameproof motor local control station suitable for installation in hazardous area zone 1.type of protection : exd, construction: cast aluminium alloy, gas group: iia,iib, temp class:t3 minimumfinishing: epoxy coated, grey colour, gasket: endless neoprene rubbermounting: mounting on steel, wall, column etc, ingress protection: ip65components spec:contact elements rating: 10a,415vstart push button green shrouded with 1no contact element (1 no.)stop push button red mushroom head stay put type and with padlocking arrangement 1nc contact (1 no.)‘motor on’ indication lamp, red colour 110vdc-1 no, ‘motor off’ indication lamp, green colour 110vdc-1 no.‘tripped on fault’ indicating lamp, amber colour 110vdc-1 no, ‘ready for start’ indicating lamp, blue colour 110vdc-1 no, ‘motor space heater’ indicating lamp, yellow colour 230vac -1 no.ammeter suitable for ct ratio 50/1 with multiple scaling up to 6 times-1 no.cable entry:m20 et(1no.) and m32 et(1 no.), cable glands:flp m20 et 1no. and m32 et 1 no.2.5 sq.mm clip on terminals minimum 24 nos, canopy g.i powder coated, certification: cmfri/peso/equivalentnote: all the push buttons and indication lamps shall be suitably labelled on ss plates.ga drawing and wiring diagram shall be submitted by vendors along with tender documents. requested flameproof control station shall be of single unit type whose cable chamber shall be on bottom and ammeter, push buttons & indication lamps shall be on top of the cable chamber. all the hardwires shall be of ss type. suitable earthing provision shall be provided on the control gear. all the components used in the flp control station shall be of reputed make suitable for installation on outdoor environment. components spec including its manufacturer name shall be mentioned in the drawings. total quantity : 1