bids are invited for ro water plant 500 lph - permeate flow capicity-500 (ltrs/hr)raw water pump- power required-1 hp, electrical-220v, single phase, cycle-2900 rpm.to remove the tatalsuspended soilds, dirt, iron, and reduce silt density index which can foul the membrane.activeted carbon filter- to remove the total color, smell, odor, form the water and filter the water, carbon average porosity 50 micron particulate size bed depth-600 mmpipelines & accessories- pipe of upvc 10 bar tested pressure testing cock & pressure gauges at inlet-outlet of system.micron filter- to remove the fine particles up to 05 microns and reduce silt density index levels to acceptable level.high pressure jet-moc-stainless steel, head-120 mwc, cycle-2900rpmro membrane- to remove the major part of tds unto 98% by membrane arranged and designed to give adequate flow and recovery.type-sprial wounded,diameter of membrane-4.0 inch, length of membrane-1 mtrro pressure tube- to pack membrane and operate at high pressure up to 250 psi.flow meter- to measure the online flow of water.pressure gauges- for calculate ^p for each unit in ro system.rota meter- quantity-02 nos(permeate & reject line)plant type microprocessor/microcontroller controlled ro water system (feed water tds less than 500 ppm),material of buster pump-stainless steel 316, 3000 ltr water storage,covered area(tin shed) 10x 10 installation and plumbing fitting. two year warrenty service per month up to two year total quantity : 1