bids are invited for cone plate rheometer - supply and installation & commissioning of cone plate rheometer with accessories as per the following specification , motor bearing - air bearings / ball bearings , gap setting - manual setting with minimal user input or fully automatic. , speed - 0.01 – 250 rpm or better , viscosity measurement range - 0.1 – 90,000 cp , viscosity test - single point or multiple-point , viscosity accuracy - ± 1.0% , temperature range - 0 – 80 (°c) , reproducibility - ±0.2% , system accuracy range - ±1.0% , repeatability - 0.002 , sample fluid - 0.5 ml to 2.0 ml , testing protocols - shear rate, shear stress, time, torque, viscosity, shear-thinning, yield stressmath model – bingham, power-law, thin index, cason. , pc interface - direct usb interface/ ethernet/ pc interface , additional requirements - temperature probe, in-built software, at least three viscosity standard must be given along with equipment, essential and most required spares and consumables for general maintenance and smooth operation of the system. , display of the instrument - touch screen with adequate screen ratio that could clearly display data.the graph and the respective values should be displayed on the screen of the instrument. , power supply - 230 volts ac, 50 hz (iec) , installation and training - the vendor should provide free of charge operational training and application, comprising of data collection, measurements and data analysis etc. this training should be given after successful installation and commissioning of the rheometer. , machine warranty - the machine shall cover a 2-year warranty with a second business day response on the service call. total quantity : 1