bids are invited for office furniture - modular partition 48mm centre size. , furniture - post forming top 25mm and superior quality rubber bending. , work bench - modular drawer unit made by 18mm post forming table top with 2 drawer and one cupboard. , comouter table - key board tray. , cpu trolley - cpu trolley. , chairs - computer chair having 5 pronged base with p.u. arms, good quality cushioned 2’’ seat & back used, neatly upholstered with back support with gas lift, seat and back 18’’x18’’ with good quality fabric.(dwc-1089). , revolving chair - revolving chair(ddc-1048) having seat and back 18’’x20’’ having 5 prongedbase with superior lastors pin hole rubber used seat and back of 2’’thick with pu arms neatly upholstered with gas lift with good quality fabric. , visitor chairs - visitor chair (dvc-1110) made from drawer section pipe powder coating, having v form seat and back 2’’ thick neatly upholstered with good quality fabric. , high back chair - ex. high back chair (ddc-1004) with neck support, v form seat and back 2’’ thick neatly upholstered swivel tilt with 5 prolonged with gas lift with good quality fabric. , wooden table - ex. wooden table (det-1163) made by 18mm commercial board laminated with 3mm teak ply with melamine polish, with teak ply board used 4’x2.6’. , table - ex. wooden table (det-1163) made by 18mm commercial board laminated with 3mm teak ply with melamine polish, with teak ply board used 5’x3’ with side unit. , sofa - sofa (des-1155) frame: made of good quality seasoned assam teakwood dulyanti treated. seat: good quality flat steel spring used in seat frame duly covered with coir, jute cloth and mar keen fixed with 4’’ thick isi mark pinhole rubber cushion. back frame & arm rest: good quality flat steel spring covered with coir jute cloth and mar keen fixed with 2’’ thick isi mark pinhole rubber and high density ‘u’ foam for giving shape in back and arms rest. , centre table - wooden centre table made by 18mm commercial board laminated