bids are invited for mirror dressing gentsfd/e6/map/16 - dimension: overall size shall be 1200mm high, 600mm wide and 100mm high.description:a)all wood to be used shall be 1st class hard teak woodb)it shall be made up of bwr plywood of grade - a of 18mm thickness as per drg in lieu of prelaminated particle board.c) 1 mm thick laminated sheet shall be pasted on all exterior and interior surface with marine grade adhesive including 6mm thick teak wood at all the exposed edges.d)looking mirror shall be5 mm thick fixed inside the teak wood frame made out of 38mmx25mm section.e) 03 x glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg.f)legs shall also be made of teak wood beading along with corner brackets as specified in drg.rest all specifications and dimensions are as per drgfinish: all unlaminated plywood surface/wooden surface shall be polished in high gloss melamine polish in walnut shade after preparation of surfaces. , table bedside fd/e6/map/15® - dimension:the overall size of the table bed side 450mm x 450mm x 500mmdescription:a) the frame shall be of 18mm square hollow pipe of 18 gauge.b) it shall be made up of bwr plywood of grade - a of 18mm thickness as per drg in lieu of prelaminated particle board.c)1mm thick laminated sheet shall be pasted on all exterior and interior surface with marine grade adhesive including 6mm thick teak wood beading at all exposed edges.d)the drawers shall be made to run on 2 x nos of stainless steel telescopic channels.e)the drawers shall be provided with 100mm long 8mm dia chrome plated handlesrest all specifications and dimensions are as per drg finish: all metal surface shall be dry powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of surfaces. , table writingfd-275 - dimension: overall size shall be 1145mm long, 600mm wide and 760mm high.description: a) all wood to be used shall be 1st class hard tea