bids are invited for class - 10000 as per fed. std. 209 e or iso 7 conforming to iso 14644 , ceiling work - the clean room ceiling shall be supported by a rigid frame structure (2”minimum) of powder coated steel adequately designed to support the ceiling. , fan filter unit terminal box - fan filter units (ffus): 1.the modular clean room shall include fan filter units (ffus) which direct a vertical laminar flow of filtered air downward through the enclosed clean room area. 2.the ffu shall have a minimum air flow rate of 750 ft3/minwith a minimum air velocity of 90 ft/min 3.size: 750 x 750 x 500 mm , air handling unit with ac - air handling unitwith hepa filter , pre filter & ac coil1.3500 cfm , 8.5 tr2.double skin al extruded structure, outer skin: 0.8 mm pre-coated 3.inner skin: 0.8 mm plain gi, thermal break al profile with thermal barrier. dx coil, pre filter 90 % down to 10 micron. & fine filter 90 % down to 5 micron. 4.fan & motor - abb / crompton /havells / siemens. , air distribution system - 1.suitablegi ducting, insulation, supports, supply & returnairraiser , drain piping, cu pipingetc. , filters - freedenberg hepa filter, 99.997% efficiency, 0.3 micron , compatible clean room panels - double skin modular cleanroom compatible panels: 1.wall & celling panelsrockwool, 80 mm.2.partition panel -esd, 5 mm, transparent panel,resistivitywithin104 to 107ohmswith static discharge provision. , control panel - 1.control panel shall include relays and circuit breakers for over load protection of all connected devices, ac contactors, and nec-compliant quick-connect fittings for lights and ffus.2.the control panel assembly shall include all power controls for ffus, lights, ahu and all other connected devices.3.a low-voltage operation status indicator (osi) lights located at each corner of the cleanroom shall provide a clear visual indication of cleanroom operation status.4.display for temperature and humidity , power outlets - 1.necessary power distributio