bids are invited for 3 seater sofa ( deluxe ) - frame structure material and size ( ±1 mm ) - any other wood of minimum 25 mm thickness, seat cushion / backrest cushion material 70 ( kg / cubic m ) - foam density, sofa seat and backrest permanently fixed with the frame structure, number of three seater units ( nos ) -1, frame covering - fully upholstered, covering material for seat and backrest – leather, warranty 5 years, colour of covering material - as per buyers choice and where woods is seen it must be well wooden polished, oem of offered product should be iso 9001:2015 certified, oem of offered product should be iso 14001:2015 certified.size details as per specification document , 1 seater sofa ( deluxe ) - frame structure material and size ( ±1 mm ) - any other wood of minimum 25 mm thickness, seat cushion / backrest cushion material 40 ( kg / cubic m ) - foam density, sofa seat and backrest permanently fixed with the frame structure, number of single seater units ( nos ) -1, frame covering - fully upholstered, covering material for seat and backrest – leather, colour of covering material - as per buyers choice and where woods is seen it must be well wooden polished, warranty 5 years, oem of offered product should be iso 9001:2015 certified, oem of offered product should be iso 14001:2015 certified.size details as per specification document , 2 seater sofa- reception - frame structure material and size ( ±1 mm ) - any other wood of minimum 25 mm thickness, seat cushion / backrest cushion material 40 ( kg / cubic m ) - foam density, sofa seat and backrest permanently fixed with the frame structure, number of two seater units ( nos ) -1, frame covering - fully upholstered, covering material for seat and backrest – leather, colour of covering material - as per buyers choice and where woods is seen it must be well wooden polished, warranty 5 years, oem of offered product should be iso 9001:2015 certified, oem of offered product should be iso 14001:2015 certified.size details as per specification document , 3 seater sofa- reception - frame structure material and size ( ±1 mm ) - any other wood of minimum 25 mm thickness, seat cushion / backrest cushion material 40 ( kg / cubic m ) - foam density, sofa seat and backrest permanently fixed with the frame structure, number of three seater units ( nos ) -1, frame covering - fully upholstered, covering material for seat and backrest – leather, colour of covering material - as per buyers choice and where woods is seen it must be well wooden polished, warranty 5 years, oem of offered product should be iso 9001:2015 certified, oem of offered product should be iso 14001:2015 certified.size details as per specification document , back drop side storage unit - side storage unit top material & thickness= 25 mm thickness three layer pre-laminated particle boards of grade ii type ii of is 12823 latestsize details as per specification document , centre table - shape of the centre table =rectangularstyle of centre table =supported by pillarsdesign of centre table = split centre tablenumber of storage under top =horizontal base as storagetop material =tempered glassframe material= other woodleg material =other woodmaterial of under structure supporting the top= other woodsize details as per specification document , corner table - shape of the corner table= rectangularstyle of centre table= supported by set of legsdesign of centre table = with four legs onlynumber of storage under top =no storagetop material =tempered glassframe material =wood with polishleg material =other woodmaterial of under structure supporting the top =other woodstorage material= other woodshoes material =pvcsize details as per specification document , director chair - pedestal base= chrome finish with 5 wheelsarm material= propyleneseat material =pu foam covered with pure leatheredmaterial of fabric back cover / material for backrest= leatheredmaterial of fabric of seat cover= leatheredchair type =knee tilt synchronicheight adjustment ± 5 ( mm ) up to= 100 mmarm =withtype of backrest support =backrest symmetrical lumber supportarm type= fixedergonomic seat design= yesback type= fixedbackrest has separate adjustable headrest =nolumber support= integratedsize details as per specification document , director table with side unit - design / shape= rectangularunder structure of main table =gable end modesty paneltable top material= mdf and veneer with pu finish having scratch resistance of 2hgable end material =mdf and veneer with pu finish having scratch resistance of 2hmodesty panel material =mdf and veneer with pu finish having scratch resistance of 2hnumber of buffer provided= four numbers at bottomsize details as per specification document , executive chair - pedestal base= glass fibre nylon with abs / nylon twin caster wheels minimum 5 nos, of 50 mm sizearm material= steel covered with polyurethaneseat material =pressed and moulded plywood with polypropylene covermaterial of fabric back cover / material for backrest= leatheredmaterial of fabric of seat cover= leatheredchair type =central tiltheight adjustment ± 5 ( mm ) up to= 100 mmarm =withtype of backrest support =backrest symmetrical lumber supportarm type= fixedergonomic seat design= yesback type= fixedlumber support= integratedsize details as per specification document , executive table with side unit - storage provided =one sidetable top =material mdf board of grade sbg ii of is 12406 / latestgable end and modesty panel material =flat single layer pre-laminated mdf board conforming to having designation plmdf-23 of is 14587 / latestsize details as per specification document , visitor chair-fixed - material of fabric back cover=leatheredframe material= chrome on msmaterial of fabric of seat cover =leatherettethickness of plywood used in seat ±1 ( mm ) =12 mmgsm / thickness of fabric ±5 ( gram per sq. meter ) =220 gram per sq. meterarm material =polypropylene on metalsize details as per specification document , workstation staff area main table with side unit for 4 persons - table of size 1200wx600dx750h mm 04 nos.side unit size: 900wx450dx750h mm - 04 nos.having top made of 25mm thick pre-laminated particle board duly edge banded and base in 18mm thick pre-laminated particle board duly edge banded partition panel of 60 mm thick & height 1200mm with fabric having raceway at two levels, one at skirting and one above / below the worktop. it should also have a provision of side unit having 3 drawer & 1 open shelf for keyboard tray & cpu bottom shelf & 18mm thick plpb keyboard tray unit in main table. , staff low back revolving chair for workstation - executive chair mid back chair having nylon base, torsion bar, aluminium back support, adjustable - arms, handle and back rest. , steel almira without locker - steel almira of size 915 ( w ) x 480 ( d ) x1980 ( h ) mm having 4 adjustable shelves making 5 compartments without locker fabrication, almira’s side, back, top, bottom & shelves are made from crca of 22 gauge. the shelves shall have lipped flange 25mm width 15mm in depth. the shelves are fitted to rack strips made of crca sheets of 20 gauge thick with help of 4 brackets of 16 gauge that for support and adjustment and are having load bearing capacity of 60kg.uniformity divided load per shelf. the doors shall be made of crca sheet of 20 gauge and should be having metal stiffener suitably spot welded to stiffen the door and fitted with the body with the help of but type hinges made of mild steel sheet of 18 gauge thickness double folded for free & smooth movement of doors. , openable shutter cabinet - openable shutters size 900 ( w ) x 500 ( d ) x 1350 ( h ) mm.openable shutters cabinet having made of 0.8mm crca sheet duly powder coated with 3.5mm clear glass. storage having 3 shelves making 4 compartments. , modular partition for storage area - modular partition 60mm thick 1200 mm height size: 900 ( w ) x 1200 ( h ) mm for storage area. partition panel of 60 mm thick & height 1200mm with fabric having raceway at two levels, one at skirting and one above / below the worktop. , main table with side unit - main table with side unit, table of size 1650 ( w ) x 750 ( d ) x 750 ( h ) mm, side unit size: 900wx450dx750h mm, having top made of 25mm thick pre-laminated particle board duly edge banded and base in 18mm thick pre-laminated particle board duly edge banded.it should also have a provision of mobile 3 drawer unit in main table & side unit having 3 drawer & 1 open shelf forcpu bottom shelf & keyboard tray in main table. , executive high back revolving chair - executive low back revolving chair with adjustable arm , tilting mechanism and cushioned leathered seat and back the overall height of the chair is 1000 mm with 75mm height adjustment. the backrest height is 450mm and width is 425mm and the thickness of back is 25mm. the seat height is max 475 mm, width of seat is 500 mm and the depth is 500mm and the having a thickness of 75mm. it should have a base pipe with chrome plated. the seat made of 12 mm hot pressed plywood with polyurethane foam of density for seat is 40 and the back has 32 kg / m3 and cushioning of very good quality leathered in desired colours. , reception table with side unit - reception table with side unit, table size: 1800 ( w ) x 600 ( d ) x 750 / 1050 ( h ) mm, side unit size: 1050 ( w ) x 450 ( d ) x 750 ( h ) mm, having top made of 25mm thick pre-laminated particle board duly edge banded and base in 18mm thick pre-laminated particle board duly edge banded. it should also have a provision of keyboard try in main table & side unit having 3 drawer & 1 open shelf forcpu bottom shelf. , executive low back chair - providing and placing executive low back chair having nylon base and torsion bars, having aluminium back support and adjustment and back rest. , round table - table size: 900dia, 750ht mm, having top made of 25mm thick pre-laminated particle board duly edge banded and base in chrome finish. , dinning chair - cafeteria chair seat & back made of 12 mm compressed moulded ply. frame made of 19mm roundpipe chrome plated not less than 16 gauge. total quantity : 1