bids are invited for 1 - providing and laying of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). , 2 - provision for 12 mm cement plaster on the rough side mix: 1:4 (1 cement: 4 fine sand). , 3 - providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , 4 - provision for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. , 5 - provision for finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade including priming coat of exterior primer applied. , 6 - painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. , 7 - provision for brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:6 (1 cement : 6 coarse sand). , 8 - pcc for appron 1:3:6 (1 cement : 3 coarse sand (zone-iii) : 6 graded stone aggregate 20 mm nominal size). , 9 - provision for submission boring for office and public toilet, and for drinking purpose at sub circle offce kushinagar. , 10 - provision for providing and fixing of wooden door(8.5feetx4feet) in outer corridor including all supply of material /accessories and labour charge( job work). , 11 - wiring for light point / fan point /geyser point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate. , 12 - supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted. , 13 - installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. frls pvc insulated, copper conductor, si