bids are invited for 1 supply & fixing of 7 mtr gi octagonal pole of approved make ( top dia 70mm, bottom dia 130mm and base plate 12mm thik ) 2 supply and fixing of led street light fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 watt. confirming to ip 66 and above protection complete in all respect 3 s&f of 16 amp. 240 v spnmetal clad rewireable type switch fuse unit on m.d.f.e.g. / teak wood board complete inall respect 4 supply and wiring of submains with two nos. of 2.5 sq. mm.frlsh pvc insulated 1100 v grade single core multistrandcopperconductorcableinexistingconduit complete with supply of all material labour and t&p required for proper completion of the work as directed at sitebyengineerincharge 5 supply and fixing following capacity of automaticstreet light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting oftime switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect 6 supply and laying of aluminium conductor pvc insulated armoured served sheathed cables 1100 voltsgrade at a depth of 750 mm below ground level over acushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cablerun shall be fixed on m.s. clamps etc. of suitable size or asdirected by the engineer-incharge, complete in all respect. 7 supply and fixing of plain orpin type coppertin plated cable socket ( lug ) to the cable leads, insulating with tapeand making connection etc. complete in all respect asper direction of the engineer-incharge 8 supply and burying of 600mm x 600mm x 6mm g.i. plate vertically for earthing with its top at least 3 metres belowground level complete with 20mm dia g.i. pipe and funnel for watering and one earthing lead of two no.8 to 10 swg gi wire in 15mm dia g.i. pipe up to switchboard ( from appron to switch board the cost of g.i. pipeand g.i. wire will be extra ) 30cm square c.i. frame with hinged cover masonry housing alternate layers of charcoal / coke and salt at least 150mm thick alround etc. asperdirectionsofengineer-in-chargecompleteinall respect.