tender for special repair of labeda anusuchit basti link road; 1 particulars of work 2 providing, laying, spreading and compacting stone aggregates of 53-22.4 mm sizes to water bound macadam g-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 80-100 kn in stages to proper grade and camber, applying and brooming requisite type-b of screening / binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for grading 3 as per mord specification.405incluidng labour cess, royalty. quarry from shankargarh ( excluding gst ) 3 providing and applying tack coat with bitumenusing bitumen vg-10, pressure distributor @ 0.30 kg / sqm.on the prepared bitumin surface cleaned with hydralic broom, as per mord specification 503 ( excluding gst ) 4 providing, laying and rolling of open - graded premix surfacing of 20 mm compacted thicknesswith 13.2 mm crushed stone grit@ 0.18cum / 10sqm and 11.2 mm size crushed stone grit @ 0.09cum / 10sqm from approved quarry and bitumen @ 1.46kg / sqmto required line, grade and level to serve as wearing course on a previously prepared base, also mixing in a suitable plant or by mixall, laying and rolling with a smooth wheeled roller 8-10tonne capacity, finished to required level and grades, including cost of material, labour, plant, machinery and t&p. complete as per mord specification no.508 ( ii ) .including the cost of bitumenvg-10, labour, t&p royalty etc. quarry from dala ( excluding gst ) 5 providing and laying seal coat type-c sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using 6.7mm crushed stone grit @ 0.09cum / 10sqm from approved quarry and bitumen / emulsion @0.65kg / sqm including cost of material, labour, plant, machinery, mixall and t&p. complete as per mord specification no.510 ( ia ) .including the cost of bitumenvg-10, labour, t&p royalty etc. quarry from dala ( excluding gst ) 6 construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to stite, spreading, grading to required slope and compacted to meet requirement of table no. 300-2 with lead upt 1000m as per technical specification cluase 303.1 ( excluding gst )