tender for tn 2787/3a dated 17.09.2024 1. sanitary repair work in pooled housing colony under maintenance head in district saharanpur, 1 providing and fixing c.p. brass long nose bib cock of approved quality confirming to isi standards and weighing not less than 810 gms. (ch-21.08) 2 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. (b) 15 mm dia. nominal outer dia pipes) (ch. 21.02) 3 supply and fixing of pvc brass elbow ¾ (dsr no. 3892) 4 supply and fixing of 15mm nominal bore and 30 cm length pvc connection pipe with(dsr no. 7862) (pvc pipe connection) 5 providing and fixing g.i. union in g.i. pipe including cutting and threadingthe pipe and making long screws etc. complete (new work) : 15 mm nominal bore (dsr no. 18.46.1) 6 providing and fixing c.p. brass stop cock (concealed) of approved quality confirming to isi standardsis 8931 (ch- 21.09) 7 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet (dsr no. 18.22.2) 150 mm diameter pipe 8 providingandfixingstainlesssteelaisi304(18/8) kitchensinkasperis13983withc.i.bracketsand stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: (kitchen sink with drain board 510x1040 mm bowl depth 250 mm) (ch-21.18) 9 providing and fixing p.v.c. waste pipe for sink or wash basin including pvcwaste fittings complete. (ch-21 item no. 21.24) 10 supply and fixing of s.w. gully trap p type 100x100 mm (dsr no. 1900) 11 supply and fixing of providingandfixingwashbasinwithc.i.brackets,15 mmc.p.brasspillartaps,32mmc.p.brasswasteof standard pattern, including painting of fittings and brackets,cuttingandmakinggoodthewallswherever require: 12 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : (dsr no. 18.18.1) 15 mm nominal bore 13 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings. this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineerin-charge. external work.. (ch-21 item no. 21.03) f) 50 mm dia. nominal outer dia pipes 14 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 (mixture pillor cock) (dsr no. 18.53.1) 15 mm nominal bore 15 providing and fixing c.p. brass bib cock of approved quality confirming to is:8931 (ch. 21 item no. 21.07) 16 supply and fixing of t-pvc ¾ (dsr no. 8846) 17 supply and fixing of stainless steel male thread tee for 15.88 mm outer dia x 15 mm nominal dia threaded (dsr no. 8845) 18 providing and fixing ptmt bib cock of approved quality and colour 15 mm nominal bore, 165 mm long, weighing not less than 110 gms (dsr no. 18.54.3) 19 supply and fixing of waste jaali 20 providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour.15 mm nominal bore, weighing not less than 32 gms (dsr no. 18.75.1) 21 socket fittings for 15 mm outer dia ss pipe of grade 316l as per is 6911:2017 and conforming to en-10312 standard (dsr no. 3868) ½ 22 g.i. inlet connection ½ (dsr no. 1614) 23 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is 7231, with all fittings and fixtures complete. (ch.-21 item no. 21.22) 24 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (ch-21 new item 21.25) 25 supply and fixing of pvc t- ½(dsr no. 8845) 26 supply and fixing of pvc bal valve ½ (dsr no. 1922) 27 supply and fixing of pvc connection (dsr no. 7863) 28 supply and fixing (c.p. brass stop cock (concealed) 15 mm) brass conceled valve ½ (dsr no 7260) 29 supply and fixing of shower complete 30 providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. (ch-21 item no. 21.23) 31 supply and fixing of pvc ball cock ½ (dsr no. 7495) 32 supply and fixing of 7.5cm. (3) internal dia a.c. down pipes everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary m.s. clamp 2.5cm x 3 mm. (1 x1/8) fixed to walls with cement motar (1:2)and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and t& p. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. (s.i. no. 730-b) 33 supply and fixing of c.p. brass centre hole basin mixer with cast spout (mixture pillor cock) (dsr no. 9001) 34 supply and fixing of 2 in one cock 35 supply and fixing of tank nippe ½ 36 supply and fixing of jet 37 supply and fixing of tap pvc (dsr no. 7406) 38 providing and placing on terrace (at all floor levels) polyethylene water storage tank lsi: 12701 marked(sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of engineer-in-charge. 39 providing and fixing water closet squatting pan (indian type w.c. pan) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (ch. 21 item no. 21.12) 40 providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or european type water closet (anglo indian w.c. pan) with seat & lid fixed with c.p. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (ch. 21 item no. 21.29) 41 supply and fixing of soap dish (dsr no. 7509) 42 supply and fixing of long body tap (dsr no. 18.51.1) 43 supply and fixing of brass elbow (dsr no. 3891) 44 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality confirming to is:8931 (ch-21 item no. 21.10) 45 supply and fixing of brass ft (dsr no. 3971) 46 supply and fixing of brass t (dsr no. 3916)