tender for road safety works of district sitapur in 06 black spots (kasraila chauraha, mehandipurwa, singhnapur, lakhbeda puliya, reusa mod and bhadfar), 1 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (mord specification) (rumble strip)kashraila chauraha 2 reusa mod 3 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 509 complete in all respects. (rumble strip)kashraila chauraha 4 reusa mod 5 p/l hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of suraface applied glass beads as per irc:35 the finished surface to be level, uniform and free from streak and holes. kashraila chauraha 6 mehandipurwa 7 singhanapur 8 lakhpeda puliya 9 reusa mod 10 bhadfar road 11 p/l of hot applied thermoplastic compound 5.00 mm thick i/c. reflectorising glass beads @ 500 gms per sqm area, thickness of 5.00 mm exclusive of surface applied glass beads as per irc: 35 . the finished surface to be level , uniform and free from streaks and holes. ( repeated bar)kashraila chauraha 12 mehandipurwa 13 singhanapur 14 lakhpeda puliya 15 reusa mod 16 bhadfar road 17 providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminum composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc-07 2012 retro reflective sheeting with back frame ms angle of 35x35x5 mm legends, letters, numerals and borders etc should be as per morth specification no-801.3.7 the sheeting shall have a pressure-sensitive adhesive of the aggressive tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. the acm (aluminium composite materials) shall be fixed on the back frame ms) angle with riveting. micro prismatic type iv retro reflective sheeting confirming to astm d4958-09 shall be pressure fixed. the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. altematively, a certificate conforming to astm specification (d) 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally in such a situation, the employer/client. if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67 2012 & proof of the same report shall be uploaded which quoting tender. the rate shall include all materials, labour, t&p, transportation. installation and incidentals all complete as per direction of the engineer-in-chargekashraila chauraha 18 mehandipurwa 19 singhanapur 20 lakhpeda puliya 21 reusa mod 22 bhadfar road 23 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc 67- 2012 made of high intensity grade sheeting type iv vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. the retro reflective sheeting shal be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory/ institute by the manufacture of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. alternatively, a certificate conforming to astm specification (d 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer / client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67 2012 legends, letters. numerals and borders etc should be as per morth specification no-801.37. proof of the same in form of government report shall be uploaded while quoting tenderkashraila chaurahacautionary boards (900 mm equilateral triangle board) 24 intersection informationboard 25 speed limit board 26 stop boards (900 mm octagonal board) 27 mehandipurwa cautionary boards (900 mm equilateral triangle board) 28 speed limit board 29 singhanapurcautionary boards (900 mm equilateral triangle board) 30 speed limit board 31 lakhpeda puliyacautionary boards (900 mm equilateral triangle board) 32 stop boards (900 mm octagonal board) 33 reusa modcautionary boards (900 mm equilateral triangle board) 34 intersection informationboard 35 speed limit board 36 stop boards (900 mm octagonal board) 37 bhadfar roadcautionary boards (900 mm equilateral triangle board) 38 intersection informationboard 39 speed limit board 40 stop boards (900 mm octagonal board) 41 supply and fixing of retroreflective high intensity informatory sign board/ cautionary sign board etc. as per morth specification (hazard marker 30cm x900cm rectangular boardlakhpeda puliya 42 suppy & fixing of pavment makers (cat eye) type xastmd-4956-04 avery dennison/3-m (usa make) consisting of asa plastic housing fitted with tightly aderent plotting compound. the housing shall contain prismatic two glass coverd prismatic reflective face to reflect light i/c all tax. kashraila chauraha 43 reusa mod 44 bhadfar road 45 excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m laharpur khairabad road(kashraila chauraha) 46 laharpur khairabad road (husainpur vr) (mord specification) 47 mehandipurwa 48 singhanapur 49 reusa mod 50 kakraha vr (mord specification) 51 bhadfar road 52 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.laharpur khairabad road(kashraila chauraha) 53 singhanapur 54 construction of sub-grade and earthen shoulders(patri) with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no. 300-2 kashraila chauraha 55 laharpur khairabad road (husainpur vr) (mord specification) 56 mehandipurwa 57 singhanapur 58 bhadfar 59 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesiredkashraila chauraha 60 laharpur khairabad road (husainpur vr) (mord specification) 61 reusa mod 62 kakraha vr (mord specification) 63 bhadfar 64 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.kashraila chauraha 65 reusa mod 66 bhadfar 67 providing and applying primer coat with ss2 grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70to 1.00 kg/sqm using mechanical means.kashraila chauraha 68 reusa mod 69 bhadfar 70 providing and laying dense graded bituminous macadam with higher capacity batch type hmp using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 505 complete in all respects. (grade-ii)kashraila chauraha 71 reusa mod 72 bhadfar 73 providing and applying tack coat with bitumen vg_10 using bitumen pressure distributor at the rate of0.20kg per sqm on the prepared bituminous surface cleaned with mechanical broom.kashraila chauraha 74 reusa mod 75 bhadfar 76 providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects.kashraila chauraha 77 reusa mod 78 bhadfar 79 providing, laying, spreading and compacting stone aggregates of 45-63 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber ,applying and brooming ,stonescreening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density kashraila chauraha 80 reusa mod 81 bhadfar 82 providing, laying, spreading and compacting stone aggregates of 22.4-53 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber ,applying and brooming ,stonescreening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density kashraila chauraha 83 reusa mod 84 providing and applying primer coat with bitumen emulsion (ss) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm using mannual means.(mord specification)kashraila chauraha 85 reusa mod 86 providing and applying tack coat with vg_10 using bitumen distributor at the rate of 0.30 kg per sqm on the preparedsurface cleaned with hydraulic broom.(mord specification)kashraila chauraha 87 reusa mod 88 providinglaying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant,laying and rolling with a three wheel 80-100 kn static roller capacity finished to required level and grades to be followed by seal coat .(mord specification)kashraila chauraha 89 reusa mod 90 providing and laying seal coat c type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall . (mord specification)kashraila chauraha 91 reusa mod 92 laying of 80 mm thick pre moulded inter locking paver tiles over 20 cm compected gsb including 4 cm thick coarse sand bed over prepared surface including all labour t&p etc. required for proper completion of work. (mort&h specification)laharpur khairabad (mehadipurwa) 93 singhnapur