tender for the work of supplying material in house number-04 new and 05 new located in gautampalli colony, 1 cutting holes up to 15x15 cm in rcc floors and roofs for passing drain pipe etc , and repairing the holes after insertion of drain pipe etc with cement concrete 1:2:4 ( 1 cement:2coarse sand : 4 graded stone aggregate 20 mm nominal size ) , includinmg finishing complete so as to make it leak proof.(18.77) 2 providing & fixing float glass panes 5.00 mm thick glass panes (weigh not less than 12.50 kg/sqm)(dar -9.7.7.2) 3 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.(dar -9.84) 4 fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading (dar -9.7.8) 5 providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).(dar -9.53) 6 providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm(dar -9.74.1) 7 providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm(dar -9.74.2) 8 providing and fixing c.p.brass bib cock of approved quality conforming to is: 8931 15 mm nominal bore ( 18.49.1) 9 providing and fixing c.p. brass long nose bib cock of approved quality conforming too is standard and weighing not less than 810 gms , ( 15 mm nominal bore) 18.50.1 10 providing and fixing c.p. brass stop cock ( concealed) of standard design and of approved make conforming to is 8931 ( 15 mm nominal bore )18.52.1 11 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 ( m15 mm nominal bore)18.53.1 12 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size-630x450 mm with a pair of 15 mm c.p. brass pillar taps. (17.7.1) 13 providing and fixing 8 mm dia c.p./s.s. jet with flexible tube upto 1 meter long with s.s. trangular plate to eureopean typew.c. of quality and make as approved by engineer-in- charge.(17.16a). 14 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (17.31).