tender for due to change of residence in house number 7/16 type-4 situated in upper dalibagh colony, renovation of damaged kitchen, renovation of a damaged bathroom and replacement of fittings, replacement of damaged windows and doors and other necessary repair work., 1 dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tiles 10 mm to 25mm. dar 15.23.1 2 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 type a, including jointing with seal ring conforming to is:5382, leaving 10mm gap for thermal expansion, all fittings like two nos bend, one mo coupler or any other accessories and p/f pvc pipe clips fixed by means of 50x50x50mm hard wood plug, secrewed with ms screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) single socketed pipes 110mm dia meter. 3 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge.concealed work, including cutting chases and making good the wall etc 15 mm nominal outer dia pipes, (sdr-11) 4 p/f white vitreous china pedestal type (european type/ wash down type) water closet pan . 17.15 5 p/f white vitreous china water closet squatting pan(indian type) orrisa pattern w.c. pan of size 580x440 mm.17.13.2. 6 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to is: 15622 of approved make in colours white, lovry greyfume red brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. 11.39 7 providing and fixing 1st quality ceramic, glazed wall tiles conforming to is 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete. 8.31 8 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet 100 mm diameter.18.22.1. 9 p/f c.p. brass angle valvefor basin mixture and geyser points ofapproved quality confirming to is:8931.15 mm nominal bore.18.53.1. 10 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge. 15 mm nominal dia dar 17.22b 11 providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thickhard board groung fixed to wooden cleats with c.p. brass screws and washers complete.17.31 12 p/f wash basin with c.i.brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern white vitrous china wash basin size 630x450 mm with a pair of 15 mm cp brass piller taps.17.7.1. 13 structual steel work riveted bolted or welded in built up section, trusses, builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. sl.n0-10.2, 14 providing and fixing isi marked 35 mm thick flush door shutters conforming to is : 2202 (part i)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. dar n0-9.21.1 15 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. granite stone slab of colour black, cherry/ruby red area of slab over 0.50 sqm .8.2.2.2.