tender for repair work in main treasury hardoi building, 1 scraping of old colour wash ps per si no 708 2 12 mm. cement plaster in 1:6 with cement and fine sand mortar etc completesi no 586 3 fixing of glass panes with isi marked putty complete in all respect si no 10.30.1 4 distempring two coat with priming si no 649+650 5 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6 finishing wall with water proofing cement paint two coat. with one coat priming. etc, complet. s.i.no. (660+661) 7 painting two coat with one coat priming s.i.no. (641+642) 8 earth work in excavation in foundation in ordinary soil si no. 251 9 p/l of cement concrete 1:6:12 ( 1 cement : 6 fine sand : 12 graded brick aggregate 40mm nominal size ) and curing complete, i/c cost of formwork in foundation and floors.as per s.i.no. 273 10 construction of granular sub base by providing well graded material , spriding in uniform layers with motor grader on prepared surface mixing by mix in place method with roatbetor at omc .and compacting with smooth wheel roaller to achieve the desiersd density , complet as per technical specification clause 401 11 2.5 cm thick pcc flooringin 1:2:4 si no 600 12 s/f of pvc pipe down pipe with isi marked 13 s/f welded mesh 2x2 size 10 mm gauge 14 pcc work in 1:2:4 sl.no.279 (b) 15 class m-150 brick work in 1:4 cement and c/sand mortar as per s.i.no. (305 b) 16 first class brick work in 1:4 cement & coursesand mortar in foundation and plinth includingall.required as pwd si.n0 305(b) 17 s/f of brick bats in fillter media in soak pit s/f of brick ballast in fitter media 40mm in soak pit 18 12 mm . cement plaster in 1:4 with cement and coursesand mortar in single coat on fair side o extra for mixing any additive . as per s.i.no. 584 19 provinding and layging r.c.c work with 2 cm guagestone grits, andcoarse sand and cement in proportion of 4:2:1 complete in all. required pwd s.i.n0 284 20 mild steel or iron in plain work such as reinforced concrete or reinforcement brick work.and including bending for proper completion of the work pwd 504 21 class m-150 brick work in 1:4 cement and c/sand mortar as per s.i.no. (305 b) 22 12 mm. cement plaster in 1:4 with cement and coarse sand mortar etc complete 23 dismantling of old floor & wall tiles si no698 24 providing and laying ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer), of 1st quality conformingto is : 15622, of approved make, in all colours, shades, except white,ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar1:4 (1 cement : 4 coarse sand), including pointing the joints with whitecement and matching pigments etc., complete. 25 providing and fixing ist quality ceramic glazed wall tiles conforming to is:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by engineer-in-charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. 26 provinding and fixing ist quality ceramic glazed non skid floor tiles 300x300mm conforming to is:15622( thckness to be specified by the manufacture), of bottle green, black of any size as approved by engineer in - charge in skirtingdsr 11.39 27 supply and fixing of 35mm thick flush door commerical quality conforming to is 2205 part 1 (1983) i/c fixing of wooden cleats, stopers, of hinger, hols, locks, sprinmgs, fitting with necessary screw to be supplied departmently etc.d.s.r 9.21.1 i/c labour 28 providing and layinginterlockoing brick s 29 providing and fixing factory made upvc white colour sliding glazed window upto 1.50 m in height dimension comprising of upvc multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile). three track three panels sliding window with fly proof ss wire mesh (two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (area of window upto 1.75 sqm). (uppwd dsr, 9.147.b4.1 30 ms iron work for fabricated work 31 wiring point for light with 1.5 sq. mm. fr pvcinsulated multistrand copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 swg copper earth continity wire, piano type switch & ceiling rose /angle /batten holder on 3 mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colourwahas per sl. no. 131 ( c ) 32 wiring point for fan/ fresh air fan (light duty exhaust fan)with 1.5 sq. mm. fr pvcinsulated multistrand copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 swg copper earth continity wire, piano type switch & ceiling rose /angle /batten holder on 3 mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colourwahas per sl. no. 133 ( c ) 33 wiring point for plug with 1.5 sq. mm. fr pvc insulated multistrand copper conductor cable in heavy gauge pvc conduit pipe concealed in the wall complete with 14 swg copper earth continuity wire piano type switch and socket etc. complete in all respects including matching colour wash etc. . as per sl.no. 134 ( c ) 34 supply and fixing ofbatten/ angle /holder complete in all respect as per si no-.405. 35 supply and fixing of 240v volts lseries miniature circuit breaker 6amp. to 32 amp (10ka) in existing mcb. db complete with connections as required as per sl.no. 1002. cat a 36 supply and fixing of40 amp. d.p. isolator cat a as per si no. 1005(a) 37 supply and fixing of8 ways spn distribution board without mcb complete in all respect as directed at site by engineer in charge as per si no- 1024 cat a 38 supply and fixing of power plug with 15 a / 250 v flush type switchand 3 pin 15 a / 250v flush type socket in suitable m.s. box of 175 mm x 100 mm x 50 mm size switch backlite sheet cover3 mm thick fixed with brass machine screws and cup washer as per sl.no. 1139 39 supply and wiring of submain with 2 numbers 2.50 sq. mm. fr pvc insulated 1100 v multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) pvc conduit with one number 1.50 sq.mm fr pvc insulated 1100 v grade multistrand single core copper copper conductoras earth continuity wire as per si.no. 1304(c) 40 erection and testing of ceiling fan and regulator for room height upto 3.50 mtr including supply of 3 mm thick g.i. down rod 19 mm dia duly painted complete in all respect as per sl.no. 1116 41 providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & c.p. flush bend with fittings & c.i. brackets 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required w.c. pan with isi marked white solid plastic seat and lid d.s.r no- 17.3.1 42 s/f of p.v.c pipe 110 mm dia 6 kg pressure i.s.i. makra ch 1 item 17 (31) 43 supply & fixing mirror of make with indian polish of 600x450mm dia size with bevelled edge.(s.o.r chapter no . 22 s.n. 14) 44 providing and fixing of 40 mm dia semi rigid pvcwaste pipefor sink or wash basin including pvc. waste fittings complete. as per dsr-17.28.1.2 45 providing and fixing 600 x 20 mm c.p. brass towel road complete with brackets fixed to wooden cleats with cp brass screws as per dsr 17.73.2 i/c gst 18% 46 providing and fixing of 15 mm providing and fixing chlorinated polyvinyl chloride (cpvc) pipes,having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.as per dsr - 18.8.1 47 providing and fixing of205 mm providing and fixing chlorinated polyvinyl chloride (cpvc) pipes,having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.as per dsr - 18.8.2 48 providing and fixing of 25 mm providing and fixing chlorinated polyvinyl chloride (cpvc) pipes,having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.as per dsr - 18.8.3 49 providing and fixing of cp brass 15mm dia nominal bore brass bib cock of approved quality conforming to ch 21 s.no 52 50 providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr 18.48