tender for construction work of visitor room in sp city office; 1 dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by engineer-in- charge within a distance of 60 meters (200 feet). s.i. no. 692 2 dismentalling of b.o.e soling/inter locking tiles including stacking of servicable material and disposal of unservicable material within a lead of 50m as per direction of ei/c (labour only) s.i. no. 19 new 3 caratage of dismentllingmaterial site up to 8km s.i. no. 231a 4 e.w. in excavation in foundation in ordinary soil & filling back into trenches. si no.251 5 earth work in cutting or in embankment in ordinary soil, xcavation to be in the form of regular pits not exceeding 1/2 m (20) depth & earth work in embankment to be in 20 cm layers including ramming & dressing the surface to required levels & solpes & also including 1.50 m (5ft) lift & 30 m (100ft) lead all complete i/c cartage upto 8km. si no. 231(a)+253 6 sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 kms from the site of work and including watering dressing etc. required for proper completion of work. s.i. no. 255 7 providing and laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work. in foundation and floors. 4.1.8 8 class-150 (non modular) brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and t&p etc.required for proper completion of the work.s.i. no. 6.1.2 9 providing and laying d.p.c 2.50 cm thick with cement concrete consisting of one part cement 1.5 part of coarse sand and three part of approved 10 mm graded stone grit and including water proofing martreial as approved by the engineer-in- charge in the proportion as specified by manufacturer. s.i. no. 361 10 class-150 (non modular) brick work in 1:6 cement and coarse sand mortar in super structure above plinth level including supply of all materials, labour and t&p etc. required for proper completion of the work. s.i. no. 6.1.2 + 6.8a 11 dismantling existing plaster including disposal of refuse as directed by engineer-in-charge within a distance of 60 meters. s.i. no. 706 12 12mm cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. s.i. no. 13.4.2 13 15mm cement plaster with cement mortar in proportion of 1:3 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. s.i. no. 13.5 14 providing and laying vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to is : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 cement, coarse sand and 40 mm b/b complete as per engineer -in -charge. si no 11.41.2 15 finishing wall with putty approved brand and manufacturer and of required shade on undacorated wall surface to give even shade over including curing and cost of all material,labour,t&p etc .require for proper completion of work. s.i. no 31 new item 16 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.s.i. no. 8.31 17 providing and fixing in wall lining medium density fibre board is: 14587:1998 marked, pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. s.i. 9.158.2 (18 mm thick.) 18 providing and fixing stainless steel curtain rod with two ss decorative brackets fixed with ss screws and pvc sleeves etc. wherever necessary complete : s.i. 18 new (20 mm dia) 19 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main t runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main t runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer-in-charge. gi metal ceiling lay in plain tegular edge global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of g i sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.s.i. no. 12.52 20 providing and laying brick coba 12mm thick laid with m-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmx30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, t&p etc complete for proper completion of work. s.i. (7 new) 21 supply and fixing of anodized aluminium door having 2mm thick aluminium section excluding coating and average coating of 20 microns fully glazed made of aluminium door tube size 83.5x44.65 m as vertical member and 1140x44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminium tublar vertical with two openable shutter, the rate will include cost of material fixtures 4mm glass handles locks screw necessary bending and excluding cost of floor spring if required for proper completion of the work as per direction of engineer-in-charge. s.i. 36 new 22 electrical work :- wiring point for light with 1.5 sq.mm.frlshpvcinsulated multistrand single core copper conductor cablein pvc conduit partlysi no. 138 c 23 wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab si no. 140 c 24 wiringpointforplugwith 1.5 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable inpvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement si no. 141 c 25 supply and fixing of power plug with 15a/250 voltflush type switch and 5 pin 15a/250v flush type universal socket in suitable m.s. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. si no. 1139 26 supply and fixing of electronic fan regulator 120-280 v. isi marked, on the existing switch board including making connections, required material, labour t&p etc. for proper completion of work to the satisfaction of engineer in charge of work. si no. 1203 a 27 supply and fixing ofled tube light with batten suitable for up to 1 x 22 watt led tube light fittingincluding tube on surface complete in all respect. si no. 1413a cat a 28 supply and fixing ofrecess/ surface/ pendentmounting round10 to 15 watt led down lighter having powder coateddie cast aluminium housing withheat sink, diffuser/ reflector and driver set complete in all respect. si no. 1402 cat aa 29 supply and wiring of submain with two number2.5sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) pvc conduit partly laid in slab. si no. 1307 c 30 supply and wiring of submain withtwo number 4 sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) pvc conduitpartly concealedinwall andpartlylaid in slab alongwith reinforcement before concreting, with one no. 2.5 sq.mm frlsh pvc insulated multistrand copper conductor cable as earth continuity wire drawn in conduit matching colour wash etc. complete in all respect si no. 221 c 31 s & f surface/flush mounting 4ways tpn distribution board with additional metal doorwithout mcb complete in all respect,as directed at site byengineer in charge. s.i. no. 1026 a cat b 32 s&f of 32 amp. double pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, t&p, painting and other material required for proper completion of the work as per direction and satisfaction of engineer in charge. s.i. no. 374 33 s&f of 6 amp to 32 amp. spmcb (10 ka) c curve si no. 1002 cat a 34 s&f of 63amp. dp mcb (10 ka) si no. 1011 cat a 35 supply and fixing hexagonal/roundg.p.fan box of approved make made up of 1.0 mm thickisi marked g.p.sheet spot welded four to eightholes of 25.4 mm for pipe entry of the box.holes should be semi-shuttered type with 0.5 mm gp sheet made upper & lower cover duty screwed fitted with 300 mm round zink coted m.s bar x 12mm & brand name should be embossed fixing with wiring conduit laid in the rcc roof before concreting along with supply of all material labour t&p etc. required for proper completion of the work si no. 1149 36 supply boaring safe earthing 37 supply of bee 5 star rated-1200mm sweep ceiling fans with fan motor of a.c permanent insulation,capacitor rating confirming bee 5 star rating and is:374/79 and also comply with is:1709/1984 with latest amendment. si no. 1501 (i) 38 add for invertor wiring in wiring point for light/fan/plug with 1.5 mm cu wire s.i. no. 189a 39 led bulb 9w eesl