supply of experimental equipment setup for heat transfer laboratory , computer controlled parallel flow & counter flow heat exchanger ? system: water to water, concentric tube type ? heat exchanger: length 1.6m ( approx. ) . insulated with ceramic wool and cladded by aluminium foil. ? outer tube: material stainless steel. id 27.5mm, od 33.8 mm ( approx ) ? inner tube: material stainless steel, od 12.7mm ( approx ) ? water flow measurement :rotameters ( 2nos. ) one each for cold & hot fluid, flow sensors ( for computerization ) ? hot water tank: made of stainless steel. insulated with ceramic fiber wool. ? hot water circulation: magnetic pump ? heaters: nichrome wire heater ( 2nos ) ? control panel comprising of: digital temp. controller: 0-199.90c ( for hot water tank ) digital temp. indicator: 0-199.90c, with multi-channel switch temperature sensors: rtd pt-100 type. with standard make on / off switch, mains indicator etc. ? instruction manual: an english instruction manual will be provided along with the apparatus ? a good quality painted rigid ms structure is provided to support all the parts. , computer controlled heat pipe apparatus with heater control ? pipes: 1st: heat pipe made of stainless steel ? 2nd: made of copper. ? 3rd: made of stainless steel ? size: 32mm dia, 350 mm length ( approx. ) ? heat sink: material stainless steel. ? working fluid in heat pipe: distilled water. ? heaters: nichrome wire band type. ? control panel comprising of ? digital voltmeter: 0-300 volts. ? digital ammeter: 0-2 amp. ? variac : 0-230 v, 4 amp. ? digital temp. indicator: 0-2000c, with multi-channel switch ? temperature sensors: rtd pt-100 type. ? with standard make on / off switch, mains indicator etc. ? instruction manual : an english instruction manual will be provided along with the apparatus ? the whole set-up is mounted on a powder coated base plate. , computer controlled heat transfer from pin-fin apparatus ? fin: pin type. ? material: brass. ? size: 12.5 mm ( approx. ) 15 cm. long ( approx. ) . ? duct: made of ms. ? fan: standard makes. ? heater: band type, nichrome wire. ? control panel comprising of: ? dimmerstat: 0-230 v, 2 amp. ? digital temp. indicator: 0-3000c, with multi-channel switch ? temperature sensors: rtd pt-100 type.5 for pin and 1 for duct temperature. ? with standard make on / off switch, mains indicator etc. ? instruction manual: an english instruction manual will be provided along ? with the apparatus ? the whole setup is mounted on a powder coated base plate. , computer controlled heat transfer through natural convection ? test section ? diameter: 38 mm ( approx ) . ? length: 500 mm ( approx ) . ? heater: nichrome wire. ? control panel comprising of : ? digital voltmeter: 0-300 volt. ? digital ammeter: 0-2 amp. ? variac: 0-230 v, 2 amp. ? digital temp. indicator: 0-3000c, with multi-channel switch ? temperature sensors: rtd pt-100 type. with standard make on / off switch, mains indicator etc. ? instruction manual : an english instruction manual will be provided along with the apparatus ? powder coated duct of ms to accommodate the assembly with front window of acrylic. ? the whole set-up is well designed and arranged on a powder-coated structure , thermal conductivity measuring apparatus ? metal bar ? material: copper ? length: 400 mm ( approx. ) ? diameter: 25 mm insulating shell ? length : 250 mm ? diameter: 200 mm cooling water jacket ? length : 75 mm ? diameter : 100 mm ? heater: nichrome wire. ? water flow measurement: by measuring cylinder ? control panel comprising of digital voltmeter: 0-300 volt. ? variac : 0-230 v, 2 amps. ? digital temp. indicator: 0-199.90c, with multi-channel switch, ? temperature sensors: rtd pt-100 type. ? with standard make on / off switch, mains indicator etc. ? instruction manual : an english instruction manual will be provided along ? with the apparatus ? the whole setup is mounted on a powder coated base plate. , liquid density meter ? weight measuring range 0.005 to 300 g ? accuracy 0.001g / cm3 ? density measuring range 0.001 to 99.999 g / cm3 ? measuring object solid, granular, film, floating body, liquid ( optional ) ? response time 5 seconds ? temperature compensation can be set from 0 to 100 0c ? solution compensation can be set to 19.99 ? display digital ? built-in battery ? dimension ( l×w×h ) 430×200×370 mm ? weight 5.5 kg , rotational viscometer ? viscosity range 15–140, 000, 000mpa.s ? torque 0.05 to 13mnm ? revolutions per minute 0.3 to 250rpm ? accuracy ±1% ? repeatability ±0.2% ? display 7in touch screen ? power supply power cable ? electrical 110 / 240v, 50 / 60hz , nanofluid heat capacity apparatus ? big ultra bright backlight lcd display ? direct reading on display ? auto range function ? temperature display. ? this apparatus is designed to measure heat capacity of nanofluids from rt+50c to 700c