bids are invited for 1. m&l for applying two coats of 100% premium acrylicemulsion paint havingvoc less than 50 gm / litre and uv resistance as per is15489:2004, alkali & fungal resistance, dirt resistanceexterior paint of required shade ( company depot tinted ) with silicon additives @ 1.43 litre / 10 sqm 1200 sqm 2. m&l for 3mm thick of wall care putty on old plasteredsurfaces including preparation of surface of ceiling andapplying two coats of oil bound distemper using auto-roller and air-less paint sprayer complete all asspecified and directed 400 sqm 3. m&l for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of over blocks as per required size and pattern, finishing and sweeping extras and complete all as specified and directed. 120 sqm 4. m&l for applying one coat of synthetic enamel paint after preparation of old steel sufaces of any description over 10 cm girth or width complete all as specified and directed 50 sqm 5. m&l for 75mm thick cement concrete ( 1:2:4 ) type b-2 ( using 40mm graded crushed stone aggregate ) as in floor / pavements complete all as specified and directed. 10 sqm total quantity : 1780