bids are invited for spares for kepl pumps - labyrinth seal - coupling side (bearing housing - de) part no.: 113- 1 for kepl pumps, model: 350x250 ksm(71l), mark no: 120-p-202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff.head:171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks- 202-01-03-sht2 deflector - bearing (casing side), part no.: 93-2 for kepl pumps, model: 350x250 ksm(71l), mark no: 120-p- 202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff.head: 171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks- 202-01-03-sht2 deflector - bearing (casing side), part no.: 93-2 for kepl pumps, model: 350x250 ksm(71l), mark no: 120-p- 202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff.head: 171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks- 202-01-03-sht2deflector - bearing (coupling side), part no.: 93-1 for kepl pumps, model: 350x250 ksm(71l), mark no: 120-p-202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff. head:171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks- 202-01-03-sht2 oil ring, part no.: 67 for kepl pumps, model: 350x250 ksm(71l), mark no: 120-p-202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff. head:171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks-202-01-03-sht2 throat bush, part no : 082, matl. : cr. st. astm a276 type-410(h) for following kepl pumps, model: 80x50ucwm35, markno:14-p-04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2 case wear rings (de), part no : 107- 1, matl. : cr. st. astm a743 gr.ca40(h) for following kepl pumps, model:80x50ucwm35, markno:14-p04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2 impeller wear rings - de, part no : 025-1, matl. : cr. st. astm a276 - type-410 (h) for following kepl pumps, model:80x50ucwm35, markno:14-p-04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2 impeller wear rings - nde, part no : 025-2, matl. : cr. st. astm a276 type-410(h) for following kepl pumps, model:80x50ucwm35, markno:14-p-04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2 impeller wear rings - nde, part no : 025-2, matl. : cr. st. astm a276 type-410(h) for following kepl pumps, model:80x50ucwm35, markno:14-p-04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2 impeller wear rings - nde, part no : 025-2, matl. : cr. st. astm a276 type-410(h) for following kepl pumps, model:80x50ucwm35, markno:14-p-04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2impeller, part no : 021, matl. : cr. st. astm a743 gr.ca15/ca6nm for following kepl pumps, model:80x50ucwm35, markno:14-p04 c/d, serv:clarified oil r/d, s.no.: 97031 & 32, drg.no.ks-440-01-00, capacity :10 m3/hr. (normal), disch. pressure : 15.65 kg/cm2, suct. pr. : 2.96 kg/cm2, speed: 2950 rpm model:80x50ucwm35, markno :120- p-208a/b, serv.: slop at atp, cs drg.no: ks-221-01-01-sht2, capacity: 50 m3/hr (normal), disch. pr. at pt (40degc) : 0.5 kg/cm2, suct.pr. : 0.79 kg/cm2 shaft with keys, matl.: cr.mo.st. astm a434-cl. bb (aisi 4140), p/no. 031, 039.1, 039.2. kirloskar ebara pumps ltd model: 80 x 50 ucwm 35, sr no. 050150, 050151, mfr ref.: kepl / ind / 1151, po ref.: 5000288- ow-46009, dt.08.08.2005, capacity: 49 m3/hr, head: 155 mt, speed: 2930 rpm, power: 37 kw, cs drg.: kf0011510010100, eqpt: 015p056 a/b, service: recycle gasoline. shaft with keys, part no. : 031, 039- 1, 2, 3 for kepl pumps, model : 350x250 ksm(71l), mark no : 120-p202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff.head:171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks202-01-03-sht2 sleeve bearing (upper & lower), part no : 052, matl. : astm a216 gr.wcb + wm for kepl pumps, model : 250x200 r2dm70l, capacity : 350 m3/hr. (normal), disch. pressure : 13.5 kg/cm2, suction pressure : 0.88 kg/cm2, drg.no.ks-202-02-01-sht-1- 6, markno: 120-p-205, serv : lan shipping, s.no.: 95006, oil ring, part no : 067, matl. : is 318 gr.11 for kepl pumps, model : 250x200 r2dm70l, markno:120-p205, serv : lan shipping, s.no.: 95006, drg.no.ks-202-02-01-sht-1-6, capacity : 350 m3/hr. (normal) disch. pressure : 13.5 kg/cm2, suction pressure : 0.88 kg/cm2 shaft with keys, inclusive of:-, matl.: cr.mo.st. astm a434 cl.bb (aisi4140), p/no. 031, key (impeller), qty: 1, matl.: cr.st. astm a276 - type 410 a, p/no. 039.1, key (coupling), qty: 1, matl.: c.s. astm a576 - gr. 1045, p/no. 039.3, 090p009 a/b, kepl - model: 080 x 50 ucwm 35 - sr no. 100298, 100299 - kepl w/o no. so326. distance sleeve, part no. : 043 for kepl pumps, model : 350x250 ksm(71l), mark no : 120-p-202a/b, serv: han at atp, m/c.no. :95004 & 5, capacity: 550 m3/hr, diff.head:171 m, imp. dia.: 684mm, speed: 1482 rpm, c.s.drg.no. ks202-01-03-sht2 sleeve bearing (upper & lower), matl : cs + wm, astm a 216 gr. wcb + wm, part no : 052, for kepl pumps, model : 350 x 250 ksm71l, sl.no : 95004 & 5, mfg.ref : kepl/ind/202, capacity : 550 m3/hr, diff head : 171 mt, speed : 1482 rpm, imp. dia : 684 mm, cs drg.no : ks-202-01-03-sht2, mark no: 120-p-202 a/b, ser: high aromatic naphtha at atp total quantity : 29