supply and placing of different furnitures for official use to the newly constructed administrative building for s.d.o. chanchal at chanchal under malda division, pwd, malda ( 2nd call ) . , sdos chamber , supply and placing of main table of size 1800 mm ( w ) x 900 mm ( d ) x 750 mm ( h ) . top surface of the table shall made up of mdf ( medium density fibre ) board duly finished with veneer and final coating of pu. the main desk should contain in built key board pull out tray for keeping keyboard of computer. the front modesty panel of the table shall be made up of mdf board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with veener and pu coating. for personal storage one mobile pedestal ( 3 drawer unit ) shall be provided of size 510 mm width x 635 mm height and 445 mm depth. the storage pedestal shall also be made up of mdf duly finished with veener & final coating of pu. the side shall be of size 1200mm width x 445mm depth x 660 mm height. the side unit shall be made up of mdf board duly finshed with veneer and final finish by pu coating. the design of the side unit shall be such that it can be placed on either side of the main table. the side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. the thickness of the top of the side unit shall be 25mm. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. , supply and placing of back unit matching with the main desk. the size of the back unit shall be 2215 mm ( w ) x 410 mm ( d ) x 2000 mm ( h ) . the back unit shall be made up of mdf board duly finished with veneer & final finish by pu coating. below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. the middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. the hardness of the pu coating shall be 1.5h. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. , supply and placing of executive high back chair. the cushioned seat should bemade of injection molded plastic outer & inner. plastic inner should beupholstered with pure leather and moulded high resilience ( hr ) polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgffor 25% compression.the cushioned back should bemade of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it should be upholstered with pure leather. the seat size should be : 47.6 cm. ( w ) x 49.2 cm. ( d ) and the back size should be: 47.5 cm. ( w ) x 77 cm. ( d ) . the armrest top should bemoulded from polyurethane ( pu ) , upholste. red in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 steps. the chair should be having active bio synchro mechanism: the adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • tilt tension adjustment can be operated in seating position. • 5-position tilt limiter giving option of variable tilt angle to the chair. • seat / back tilting ratio of 1: 2. • the mechanism housing should bemade up of hpdc aluminium black powder coated. the seat depth adjustment should beintegrated in the seat through a sliding mechanism. seat depth adjustment range should beof 6.0±0.5 cm. there should be 5 adjustable back support: back frame should beconnected to the up / dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment should have an adjustment stroke of 10.0±0.3 cm. the pedestal should behigh pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be65.0 ± 0.5cm. pitch-center dia. ( 75.0 ± 1.0cm. with castors. ) . the twin wheel castors should beinjection mouldedin black polypropylene. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. the bidder to submit oem certificate of product forgriha & svagriha, bifma level 2, green pro, greenguard, indoor advantage gold. , supply and placing of visitor chair. the seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. the seat size should be : 47.0 cm. ( w ) x 48.0 cm. ( d ) the back asembly. should bemade of powder coated ( oft 40-60 microns ) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. the back size should be 46.5 cm. ( w ) x 60.5cm. ( h ) . the hr polyurethane foam should bemoulded with density =45+ / -2 kg / m3 and hardness load 16 ± 2 kgffor 25% compression. the one-piece armrests should beinjection moulded from black co-polymer polypropylene. the powder coated ( dft 40-60.microns ) tubular frame should becantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm thick m.s.e.r.w. tube. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. bidder to submit oem certificate of product for indoor advantage gold, griha & svagriha, green pro. , supply and placing of 1 seater sofa with dimensions 870 mm x 820 mm x 790 mm. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. , supply and placing of centre table of dimension 904 mm ( w ) x 444 mm ( d ) x 411mm ( h ) . all panels are to be made of 18mm prelaminated particle board, with all exposed edges having 2mm thick pvc edge banding. the drawer is fitted with two way slides so that it can be opened from both sides. bottom & middle horizontal panel provides storage area. four nylon bushes are provided. the top should be 8mm thick toughened glass with uv plate glued on it. this glass is fixed with the side vertical panels. the construction should be knock-down in nature. the finish should be of plt panels, uv guled plates under glass have sunray finish. the dowels for knockdown assembly with high quality standard hardware like screws, two way drawer slides and nylon bushes etc. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. , meeting hall ( big ) , supply and plaicng of table for for dias, worksurface should be made of 25mm khick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. plastic abs access flap is to provided for easy access to wires and cables. the understructure should consist of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. aluminium alloy 63400 - wp profile is used for connecting panels together. the product should be of knock-down construction. the modesty panel should be made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. powder coated accent metal strip provided below work surface to enhance aesthetics. it should be made of 0.8mm crca as per is 513, epoxy polyester powder coated ( dft 40-60 microns ) . the wire management should be an array of panels made of 0.8mm crca ms is:513, epoxy polyester powder coated ( dft 40-60 microns ) is used for flow of wires and cables. provision to mount anchor roma 6 module plate is provided below worktop. cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio, video cables onto worktop and connect devices charger to power socket below worktop. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. bidder to submit oem certificate of products for griha & svagriha, green pro, greenguard, indoor advantage gold. , supply and placing of chairs. the seat and back should bemade up of injection moulded indoor grade polypropylene compound. the seat size should be 52.5 cm. ( w ) x 53.2 cm. ( d ) . the back size should be 51.6 cm. ( w ) x 40.5 cm. ( h ) . the powder coated ( dft 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm mserw tube. the shoes should bemade of indoor grade polypropylene compound and snap fitted with tubular frame. the armrest should bemade of indoor grade polypropylene compound and assembled over the tubular frame. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. bidder to submit oem certificate of products for green pro, greenguard, indoor advantage gold, griha & svagriha. , supply and placing of high back chair. the seat and back should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should bedesigned with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. the back size should be 47.5 cm. ( w ) x 69.5 cm ( h ) and the seat size should be 47.0 cm. ( w ) x 48.0 cm. ( d ) . the hr polyurethane foam should bemoulded with density = 45±2 kg / m3 and hardness load 16 ± 2 kgffor 25% compression. the one-piece armrests should beinjection moulded from black co-polymer polypropylene. the chair should have center tilt synchro mechanism: the mechanism should bedesigned with the following features: • 360° revolving type. • upright-position locking • tilt tension adjustment • seat / back tilting ratio of 1:3. the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. the bellow should be3 piece telescopic type and injection moulded in black polypropylene. the pedestal should beinjection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be66.3 ±0.5cm. pitch-center dia. ( 76.3 ±1.0cm with castors ) . the twin wheel castors should beinjection moulded in black nylon. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. bidder to submit oem certificate forproduct certificate of products for green pro, indoor advantage gold, griha & svagriha. , supply and placing of high back chair. the seat and back should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should bedesigned with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. the back size should be 47.5 cm. ( w ) x 58.0 cm ( h ) and the seat size should be 47.0 cm. ( w ) x 48.0 cm. ( d ) . the hr polyurethane foam should bemoulded with density = 45±2 kg / m3 and hardness load 16 ± 2 kgffor 25% compression. the one-piece armrests should beinjection moulded from black co-polymer polypropylene. the chair should have center tilt synchro mechanism: the mechanism should bedesigned with the following features: • 360° revolving type. • upright-position locking • tilt tension adjustment • seat / back tilting ratio of 1:3.the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. the bellow should be3 piece telescopic type and injection moulded in black polypropylene. the pedestal should beinjection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be66.3 ±0.5cm. pitch-center dia. ( 76.3 ±1.0cm with castors ) . the twin wheel castors should beinjection moulded in black nylon. bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. bidder to submit oem certificate of products for green pro, indoor advantage gold, griha & svagriha. , meeting hall ( small ) , supply and placing ofconference table. the worktop should be made of 25mm thick mdf. one side pre­laminate board conforming to is­14587:1998 with 0.4mm pvc membrane pressed on to top and having chamfered edge. access panels provided with soft closing hinges. the under-structure should consists of mixture of 25mm and 18mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. anodised aluminium alloy 63400 - wp profile is added at bottom edges for improving the aesthetics. the product should have a knock-down construction. the bottom cabinet with door is provided for flow of wires and cables. cutout provision below access flap at four locations for standard 8 module anchor roma is provided. beside each cutout, an additional cutout with plate is provided for mounting audio visual cables ( eg. hdmi, vga-a, etc ) . bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. bidder to submit oem certificate of products for griha & svagriha, green pro, greenguard, indoor advantage gold. , supply and placing of high back chair. the seat and back should bemade up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam should bedesigned with contoured lumbar support for extra comfort. the back size should be 49.0 cm. ( w ) x 71.0 cm. ( h ) and the seat size should be 49.0 cm. ( w ) x 44.0 cm. ( d ) . the hr polyurethane foam should bemoulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgffor 25% compression. the armrest tops should beinjection moulded from black polypropylene. they should befitted to tubular armrest supports made of ø2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ) . the tubular armrest supports hold together the seat and back. the chair to have center tilt mechanism. the mechanism should bedesigned with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at center • upright position locking. • tilt tension adjustment. the pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. the twin wheel castors should beinjection moulded in black nylon. the bellow should be3 piece telescopic type and injection moulded in black polypropylene. the pedestal should befabricated from 0.2 ± 0.02 cm thick hr sheet , powder coated ( dft 40-60 microns ) and fitted with an injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be60.0 ±0.5cm. pitch-centre dia. ( 70.0 ±1.0 cm. with castors ) . bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. , supply and placing of high back chair. the seat and back should bemade up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam should bedesigned with contoured lumbar support for extra comfort. the back size should be ( w ) 49.0cm x ( h ) 71.0 cm, and the seat size should be 49.0 cm. ( w ) x 44.0 cm. ( d ) . the hr polyurethane foam should bemoulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgffor 25% compression. the armrest tops should beinjection moulded from black polypropylene. they should befitted to tubular armrest supports made of ø2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ) . the tubular armrest supports hold together the seat and back. the chair to have center tilt mechanism. the mechanism should bedesigned with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at center • upright position locking. • tilt tension adjustment. the pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. the twin wheel castors should beinjection moulded in black nylon. the bellow should be3 piece telescopic type and injection moulded in black polypropylene. the pedestal should befabricated from 0.2 ± 0.02 cm thick hr sheet , powder coated ( dft 40-60 microns ) and fitted with an injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be60.0 ±0.5cm. pitch-centre dia. ( 70.0 ±1.0 cm. with castors ) . bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture. , supply and placing of visitor chair. the seat and back should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam should bedesigned with contoured lumbar support for extra comfort. the back size should be 49.0 cm. ( w ) x 47.0 cm. ( h ) and the seat size should be 49.0 cm. ( w ) x 44.0 cm. ( d ) . the hr polyurethane foam should bemoulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgffor 25% compression. the armrest tops should beinjection moulded from black polypropylene. they should befitted to tubular armrest supports made of ø2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ) . the tubular armrest supports hold together the seat and back. the tubular frame should becantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ) . bidder should submit oem certificate for igbc, iso 9001:2015, iso 14001:2015, iso 45001:2018, iso 50001:2018, iso 13485:2016 / ns-en iso 13485:2016 from nabcb ( central govt ) accredited organization. certificates obtained from any other non-approved agency will not be acceptable. bidder should submit certificate from all india occupational therapists’ association ( aiota ) confirming the design meeting the ergonomic standards and performance evaluation criteria for the office furniture range and the education furniture.