tender for misc civil works at sdf building=-- 1 stripping off worn out plaster and raking out joints of walls, ceilings etc. upto any height and in any floor & disposal of the same beyond the compound, in conformity with the municipal / corporation rules for such disposal, loading into truck and cleaning the site in all respect as per direction of engineer in charge. 2 plaster ( to wall, floor, ceiling etc. ) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary ( at floor & any location ) . with 1:6 cement mortar, 15 mm thick plaster. 3 supply, fitting & fixing of bubble free float glass of approved make and brand conforming to is: 2835-1987. 4 mm thick clear glass. at any floor & any location. approved brand. 4 painting with ready mixed red lead paint of approved make and brand. two coats. at any floor & any location. 5 painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. on steel or other metal surface. with other than hi-gloss of approved quality.two coats. at any floor & any location. 6 rendering the surface of walls and ceiling with water proof wall putty, compitable with acrylic paint of approved make & brand. ( 1.5 mm thick ) . at any floor & any location. 7 supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to is 1038-1975 and manufactured from rolled steel sections conforming to is 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4 ) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. openable steel windows as per is sizes with side hung shutters and horizotal glazing bars. at any floor & any location. the rate is inclusive of remove the old damaged ms windows from the wall & stack at suitable place as decided by eic. 8 taking out m.s. or w.i. grills / windows from wooden frame or concrete or brick wall including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. at any floor & any location. 9 supplying, fitting and fixing steel rolling shutter profile type with 18 b.g . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required nos. of c.i. pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. measurement will be made on the area of opening covered by the rolling shutter corrected upto 2 decimal. 10 labour for dismantling g.i. pipe with specials & fittings. dia 100 mm. at any floor & any location. 11 labour for dismantling g.i. pipe with specials & fittings. dia 80 mm. at any floor & any location. 12 labour for dismantling g.i. pipe with specials & fittings. dia 50 mm. at any floor & any location. 13 supplying, fitting and fixing cpvc ( chlorinated polyvinyl chloride ) pipes of approved make conforming to is-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. ( payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. for exposed work. cpvc pipes class-1, sdr-11. dia 50 mm. at any floor & any location. 14 supplying, fitting and fixing cpvc ( chlorinated polyvinyl chloride ) pipes of approved make conforming to is-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. ( payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. for exposed work. cpvc pipes class-1, sdr-11. dia 80 mm. at any floor & any location. 15 supplying, fitting and fixing cpvc ( chlorinated polyvinyl chloride ) pipes of approved make conforming to is-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. ( payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. for exposed work. cpvc pipes class-1, sdr-11. dia 100 mm. at any floor & any location. 16 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. single socketed. dia 110 mm. the rate is inclusive of necessary stagging / scaffolding, lip ring, door gasket, rubber ring, rubber lubricant & cement solvent, etc. at any floor & any location. 17 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. single socketed. dia 160 mm. at any floor & any location. 18 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. door tee. dia 110 mm. at any floor & any location. 19 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. door bend. dia 110 mm. at any floor & any location. 20 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. vent cowl. dia 110 mm. at any floor & any location. 21 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. vent cowl. dia 160 mm. at any floor & any location. 22 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. 110 / 110 s trap. at any floor & any location. 23 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. coupler. 110 mm. at any floor & any location. 24 supply of upvc pipes ( b type ) & fittings conforming to is-13592-1992. coupler. 160 mm. at any floor & any location.