the running works of under full deposited fund-2021-22 in the different areas of eudd-iv, bareilly under eudd-iv, bareilly loading, unloading and safe cartage of the following materials from electricity store centre, bareilly to the work site/dump site. 2 s.t pole 11 mtrlong 3 p.c.c. pole 8.5 mtr long 4 acsr dog conductor 5 acsr weasel conductor 6 a.b. cable 3x120 mm 7 a.b cable 3x95 mm 8 a.b cable 3x50 mm 9 11 kv xlpe cable 3x70 sqmm 10 11 kv xlpe cable 3x120 sqmm 11 11 kv xlpe cable 3x185 sqmm 12 stay rod 13 ms earthing rod 14 25/63/100 kva t/f 11/0.4kv 15 11 kv disc insulator 16 11 kv disc fitting 17 i1 kv pin insulator 18 11 kv pin with nut 19 11 kv x-arm v-type 20 11 kv pilfer proof metering cubical 21 11 kv ct/pt double metering combined unit ct/pt 22 11 kv cable box 3x70 sqmm 23 11 kv cable box 3x120 sqmm 24 11 kv cable box 3x185 sqmm 25 top channel 11 kv 26 dropper chanel 11 kv 27 t off channel 11 kv 28 s/s angle base 29 11 kv x-bracing 30 guarding angle with clamp 31 other line material 32 eretion , laying , sagging , mounting work. 33 fabrication, erection of single pole for 11 kv line on stp i1 mtr. long pole with fixing of necessary clamps & other accessories like i no. 11 kv v-type cross arm,1 no. f-clamp. 34 fabrication, erection of single pole for h.t& l.t line on 8.5 mtr. long pole with fixing of necessary clamps & other accessories. 35 fabrication, erection of 11 kv double pole structure for end terminations on 11 m long st pole/8.5 m pcc pole with fixing of necessary clamps & other accessories like 1 nos. top channel 100x50 mm 2.24 mtr, bracing 36 grouting of poles with 1:4:8cc ratio of cement, sand & brick ballast, backfilling of pits with mud completely. all required materials shall be provided by the contractor at his own cost. 37 erection/fixing for stay set with stay wire and clampasperresspodrawingincluding binding.climbing, clamping, tightening and nuzzling etc. complete in all respect including its grouting in ratio 1:4:8 before back filling of the pits as per resspo, cement, brick, concrete ballast, sand and etc would be provided by the contractor for 11 kv single support & double pole structure 38 stringing and sagging of 11 kv overhead line on acsr conductor as per resspo norms. 39 stringing and sagging of l.t. line on a.b. cable (3x120 sqmm) as per resspo norms. 40 stringing and sagging of l.t. line on a.b. cable (3x95 sqmm) as per resspo norms. 41 stringing and sagging of l.t. line on a.b. cable (3x50 sqmm) as per resspo norms. 42 laying of 11 kv xlpe cable by trench less technology method by deep drilling ystem. the work is to be carried out as per govt. approved drg. 43 digging of trench as per norms and proper laying and commissioning of 11 kv xlpe size cable with sand and briks including road restoration work as per resspo norms. 44 erection of guarding of 11 kv crossing. 45 hoisting of 11 kv xlpe cable on double pole with gi pipe of size 6 dia including its jumpering complete with clamps nut and bolts. (gi pipe shall be provided by the contractor). 46 fixing of 11 kvxlpe cable outdoor jointing kits after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimping of proper size good quality lugs and complete work. 47 earthing of pole as per resspo norms. 48 pipe earthing as per respo norms. all material will provided by the contractor 49 installation and commissioning of 11 kv pilfer proof metering cubical ctr 20/5 amp. 50 installation and commissioning of 11 kv ct/pt double metering combined unitct/pt ctr 20/5 amp. 51 mounting of 25/63/100 kva t/f with complete fitting.