procurement of different types of fabricated spares at sgtpp under bm2 dept. procurement of different types of fabricated spares for blow down pump, coc, feeder, rja seal air attachments etc. at sgtpp under bm2 dept. , procurement of different types of fabricated spares for blow down pump, coc, feeder, rja seal air attachments etc. at sgtpp under bm2 dept. , shaft set,moc- ss410,vo wpe 100/320 for blowdown transfer pp vo wpe 80/400 & 100/320 pt no-7 wpil for pp sl no. bvk-50150-151/bvk-50152-153/bvk-50154-155 ( consists of three shaft-1,2 and 3. as per drawing of boiler blow down pump’s spares. ) , coupling sleeve for blowdown transfer pump wpil part no-21 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155,wpil,moc: ss 410 ( shaft sleeve /coupling sleeve–a. as per drawing of boiler blow down pump’s spares. ) , shaft sleeve for blowdown transfer pump wpil part no-19 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc: ss 410 ( shaft sleeve –b. as per drawing of boiler blow down pump’s spares. ) , rubber bearing ( rubber bush/cut less bearing, moc:inner: teflon, outer: brass (copper-85%, tin-85%, lead-85%, zinc-85%). as per drawing of boiler blow down pump’s spares. ) , bush bearing/ b. housing for blowdown transfer pump wpil part no-20 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc:teflon ( as per drawing of boiler blow down pump’s spares. ) , shaft coupling ( coupling sleeve, moc: ss410, as per drawing of boiler blow down pump’s spares. ) , support (tube support) mkd 10/1 # ( support tube with union joint, moc: gi. as per drawing. ) , support plate # ( support tube with support plate and end cover, moc: gi. as per drawing. ) , wheel(hand chain)for chainpully # ( chain gate wheel with chain, moc: ci casting. as per drawing. ) , flange coupling,nrv coupling (male) ( boiler blow down pump nrv , moc: as per sample. as per drawing of boiler blow down pump nrv drawing. ) , shaft,intermediate,coc gear box,feeder for coc of feeder of coal mill xrp1003 ( coc intermediate shaft type-a. moc:21mncr5 [ fe: 97.60%,mn: 1.17%,cr: 0.98%,si: 0.25%] as per drawing. ) , hose,ss 304 flexible hose ( ss flexible hose with flanges at both ends. pipe id: 50 mm & pipe od: 60 mm. hose length: 1 meter, pcd of flanges: 145 mm, no of holes:04 nos, hole dia: 17 mm, flange thickness:16 mm, flange od: 185 mm, moc: ss304. (as per drawing). ) , screw,self drill,washer,5.5x25mm , screw,pan head,8x13mm,gi ( packet size:(min)02 kg to (max)05 kg ) => limited