supplying, fitting and fixing different types of furniture for the office of wbmdfc at amber building, dd-27 / e, salt lake, sector-i, kolkata-700 064 , aristo 1800 with eru:made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top softclosing access flap with in-build power box are provided on work surface for wire management. secondary work surface made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. modesty panel made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. understructure made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. integrated pedestal made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. drawer fronts made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top pedstal construction is box-box-file type which uses powder coated 400 mm long metal panel drawer slides. drawer extension is 325 mm. drawers have a soft closing & anti slam mechanism. handles are provided for ease of opening. pedestals are provided with lock for security. all metal parts must be powder-coated with epoxy polyester mixture ( >40 microns ) to prevent rust and stain. all ms components must be subject to 1000 hours salt spray test following the 7-tank galvanization and powder-coating process. the product should be 80% mii, and should have in-house test certificates in addition to greenguard ( by ul ) , indoor air quality gold, griha & svagriha and green pro. the oem should be part of the bifma compliance programme and should have 10 products or more registered as bifma compliant. ( also verifiable from www.bifma.org ) . manufacturer should have green guard ( by ul ) , green pro, griha, indoor advantage certification along with products certifications including aiota, indian design mark, bifma level 2 confoms to ansi / bifma e3-2014e furniture sustainability standard issued by bifma. other certificates iso 9001:2015. iso 14001:2015, iso 50001:2018, iso 45001:2018 ( tuv-approved / obtained from nabcb- central govt. accredited organization ) are mandatory. manufacturer should have bifma compliant certification for at least 10 of its products.supplier should have either oem or its dealer with 5 years setup of local service centre ( valid documentation must besubmitted bv the bidder ) . , aristo 1800 with eru: , versa neo hb: 1 ) seat / back assembly: the cushioned seat should bemade of injection molded plastic outer & inner. plastic inner should beupholstered with stitched cover and moulded high resilience polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgffor 25% compression.the stitched cover should bemade from spacer fabric and leatherette. cushioned back should bemade of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with spacer fabric and leatherette. seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) back size : 45 cm. ( w ) x 75.5 cm. ( d ) 2 ) armrests the armrest top should bemoulded from polyurethane ( pu ) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk ms e.r.w tube. the armrest height adjustable up to 6.5±0.5cm in 5 steps.the armrest structure should bepowder coated ( dft 40-60 micron ) . 3 ) active bio-synchro mechanism ( fu3401 / 3402 ) : the adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • tilt tension adjustment can be operated in seating position. • 5-position tilt limiter giving option of variable tilt angle to the chair. • seat / back tilting ratio of 1: 2 • the mechanism housing should bemade up of hpdc aluminium black powder coated. 4 ) seat depth adjustment seat depth adjustment should beintegrated in the seat through a sliding mechanism. seat depth adjustment range should beof 6.0±0.5 cm. 5 ) adjustable back supportback frame should beconnected to the up / dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 6 ) pneumatic ht. adjustment the pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.9 ) twin wheel castor : 5 nos. twin wheel castors should beinjection moulded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. all metal parts must be powder-coated with epoxy polyester mixture ( >40 microns ) to prevent rust and stain. all ms components must be subject to 1000 hours salt spray test following the 7-tank galvanization and powder-coating process. the product should be 90% mii, and should have the following certificates: greenguard ( by ul ) , iaq gold ( by scs global ) , griha & svagriha, bifma level 2 ( should be visible in www.bifma.org ) , green pro. product should have in-house certificates. the oem should be part of the bifma compliance programme and should have 10 products or more registered as bifma compliant. ( also verifiable from www.bifma.org ) . manufacturer should have green guard ( by ul ) , green pro, griha, indoor advantage certification along with products certifications including aiota, indian design mark, bifma level 2 confoms to ansi / bifma e3-2014e furniture sustainability standard issued by bifma. other certificates iso 9001:2015. iso 14001:2015, iso 50001:2018, iso 45001:2018 ( tuv-approved / obtained from nabcb- central govt. accredited organization ) are mandatory. manufacturer should have bifma compliant certification for at least 10 of its products.supplier should have either oem or its dealer with 5 years setup of local service centre ( valid documentation must besubmitted bv the bidder ) , versa neo mb: 1 ) seat / back assembly: the cushioned seat should bemade of injection molded plastic outer & inner. plastic inner should beupholstered with stitched cover and moulded high resilience polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgffor 25% compression.the stitched cover should bemade from spacer fabric and leatherette. cushioned back should bemade of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with spacer fabric and leatherette. seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) back size : 45 cm. ( w ) x 60.5 cm. ( d ) 2 ) armrests the armrest top should bemoulded from polyurethane ( pu ) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk ms e.r.w tube. the armrest height adjustable up to 6.5±0.5cm in 5 steps.the armrest structure should bepowder coated ( dft 40-60 micron ) . 3 ) active bio-synchro mechanism ( fu3401 / 3402 ) : the adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • tilt tension adjustment can be operated in seating position. • 5-position tilt limiter giving option of variable tilt angle to the chair. • seat / back tilting ratio of 1: 2 • the mechanism housing should bemade up of hpdc aluminium black powder coated. 4 ) seat depth adjustment seat depth adjustment should beintegrated in the seat through a sliding mechanism. seat depth adjustment range should beof 6.0±0.5 cm. 5 ) adjustable back supportback frame should beconnected to the up / dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 6 ) pneumatic ht. adjustment the pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.9 ) twin wheel castor : 5 nos. twin wheel castors should beinjection moulded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. all metal parts must be powder-coated with epoxy polyester mixture ( >40 microns ) to prevent rust and stain. all ms components must be subject to 1000 hours salt spray test following the 7-tank galvanization and powder-coating process. the product should be 90% mii, and should have the following certificates: greenguard ( by ul ) , iaq gold ( by scs global ) , griha & svagriha, bifma level 2 ( should be visible in www.bifma.org ) , green pro. product should have in-house certificates. the oem should be part of the bifma compliance programme and should have 10 products or more registered as bifma compliant. ( also verifiable from www.bifma.org ) . manufacturer should have green guard ( by ul ) , green pro, griha, indoor advantage certification along with products certifications including aiota, indian design mark, bifma level 2 confoms to ansi / bifma e3-2014e furniture sustainability standard issued by bifma. other certificates iso 9001:2015. iso 14001:2015, iso 50001:2018, iso 45001:2018 ( tuv-approved / obtained from nabcb- central govt. accredited organization ) are mandatory. manufacturer should have bifma compliant certification for at least 10 of its products.supplier should have either oem or its dealer with 5 years setup of local service centre ( valid documentation must besubmitted bv the bidder ) . , mingle unitized 10 str: conference table 10 seater w / o wire manager size shall be 2700 width mmx 1200 depth mmx 750 height mm . the top shall be made from 25 mm thick pre- laminated board with 2 mm pvc edge beading. the understructure shall have side panels of 25 mm thick pre-laminated twin with 2 mm thick pvc lipping of same color on sides and 0.8 mm pvc lipping of matching coloron the bottom curve. the modesty shall be made from 18 mm thick pre-laminated board with 0.8 mm pvc lipping of matching color. centre support panel for 10 - seater shall have panels made from 25 mm thick pre- laminated twin with 2 mm pvc lipping of matching color on sides and 0.8 mm pvc lipping of matching color on the bottom curve. the w / o wire management access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice sockets from top powder coated switch mounting tray made made from 0.8 mm and 1.2 mm ms sheet . switches to be mounted on tray as per requirement . wire manager rehau made from rau - pvc 1309 / 7558. all metal parts must be powder-coated with epoxy polyester mixture ( >40 microns ) to prevent rust and stain. all ms components must be subject to 1000 hours salt spray test following the 7-tank galvanization and powder-coating process. the product should be 90% mii, and should have the following certificates: greenguard ( by ul ) , iaq gold ( by scs global ) , griha & svagriha, green pro. product should have in-house certificates. the oem should be part of the bifma compliance programme and should have 10 products or more registered as bifma compliant. ( also verifiable from www.bifma.org ) . manufacturer should have green guard ( by ul ) , green pro, griha, indoor advantage certification along with products certifications including aiota, indian design mark, bifma level 2 confoms to ansi / bifma e3-2014e furniture sustainability standard issued by bifma. other certificates iso 9001:2015. iso 14001:2015, iso 50001:2018, iso 45001:2018 ( tuv-approved / obtained from nabcb- central govt. accredited organization ) are mandatory. manufacturer should have bifma compliant certification for at least 10 of its products.supplier should have either oem or its dealer with 5 years setup of local service centre ( valid documentation must besubmitted bv the bidder ) . , la sede visitor: seat / back assembly : the cushioned seat should bemade of injection molded plastic outer & inner. plastic inner should beupholstered with pure leather and moulded high resilience ( hr ) polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgffor 25% compression.the cushioned back should bemade of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. ( w ) x 49.2 cm. ( d ) back size : 46.5 cm. ( w ) x 59.5 cm. ( d ) visitor tubular frame: the tubular frame should becantilever type and made of ø2.54± 0.03 cm x 0.02 ± 0.016cm thick ss 202 tube. the back should beconnected to frame through chrome plated high pressure die case connector piece. overall dimensions of chair seat height -46.2 cm. height -98.2 cm. width & depth of chair as measured from base - width-60.9 cm and depth-64.7 cm , monarch 3 seater sofa: 3 seater - overall size :width:171cmdepth : 82cm height :85cmseating height : 44cm primary material - pinewood finish color - burgundy upholstery material - leatherette seat height ( cm ) - 45 warranty - 1 year net weight ( kg ) - 39