procurement of different types of motor pulleys for u#6 under ahp(e/m) dept., santaldih t.p.s. , the wbpdcl. , procurement of different types of motor pulleys for u#6 under ahp(e/m) dept., santaldih t.p.s. , the wbpdcl. , pulley, 3-grv spc5300, od-327xid-60xfw-150 for motor sz-45kw 1477rpm frame- hx+225smc4 moc-ci, with taper lock bush, inside dia- 60 mm; face width- 150 mm; key- 17 x 4.5 mm; belt spec.- spcpt 5300; no of belts- 3 nos. additional data: for u#6 mrc motor. , pulley, 3-grv spc5300, od-280xid-72xfw-150 for motor sz-90kw 1480rpm frame- k280m moc-ci, with taper lock bush, inside dia- 72 mm; face width- 150 mm; key- 20 x 6 mm; belt spec.- spcpt 5300; no of belts- 3 nos additional data: for u#6 iac motor #a&#b. , pulley,4grv spc4250,od-310xid-75xfw-110 for motor sz-90kw 1480rpm frame k280m moc-ci, with taper lock bush, inside dia- 75 mm; face width- 110 mm; key- 20 x 6 mm; belt spec.- spc-pt 4250; no of belts- 4 nos additional data: for vacuum pump motors. , pulley, 3grv c1960/c75, od-260xid-48xfw-85 for motor sz-22kw 1460rpm frame- d 180l moc-ci, with taper lock bush, inside dia- 48 mm; face width - 85 mm; key- 12 x 5 mm; belt spec.- c 1960/c 75 additional data: for u#6 esp fluidising blower motor. , pulley, 3grv c1960/c75, od-255xid-55xfw-85 for motor sz- 30kwframe-d200l, rpm 1470 moc-ci, with taper lock bush, inside dia- 55 mm; face width - 85 mm; key- 15 x 5 mm; belt spec.- c 1960/c 75 additional data: for u#6 silo fluidising blower motor. , pulley, 3grv b2250/b87, od-215xid-41xfw-65 for motor sz- 15kw, 1460rpm, frame-d160l moc- ci, with taper lock bush, inside dia- 41 mm; face width- 65 mm; key- 10 x 5 mm; belt spec.- b 2250/b 87; no of belts- 3 nos additional data: for u#6 silo vent fan motor. => limited