procurement of fuel operated garbage tipper for transporting segregated waste under baranagar municipality (fund of 15th f.c. tied grant s.w.m.) , works specifications details: generic parameters: type of tipper: garbage tipper, type of chassis frame: conventional, category of vehicle for which chassis to be used: light capacity commercial vehicles, type of chassis: chassis with face cowl, type of fuel: diesel vehicle emission compliance: bs-vi (version-2) speed, max (km/hr): 80, vehicle engine capacity (cc): minimum 1490 cc, max engine power bhp (bhp@rpm): minimum 70 hp@4000 rpm, rated rpm at max engine power: minimum 3300, max engine torque (n-m@rpm): minimum 140 (n), rated rpm at max engine torque: minimum 1600, main engine aspiration: turbocharged intercooled, no of cylinder in main engine (nos): minimum 4 cylinders , fuel tank capacity (ltrs): minimum 35 ltrs, grade ability of vehicle with load( %): minimum 28 %, ground clearance (mm): minimum 175 mm, wheel base (mm): minimum 2350mm, kerb weight (kg): minimum 1200kg, gross vehicle weight (kg): not more than 2600kg, type of bis marked vehicle tyre: radial, chassis transmission system: manual, number of speed/ forward gears: 5, type of steering: power operated, turning radius, min (mm): not more than 5.50m, speed governers/ecu: yes, abs fitted: no, front vehicle brake: disc brake hydraulic, rear vehicle brake: drum brake hydraulic, type of clutch: single plate dry, tipping angle (degree): minimum 45 degrees, tipper container capacity/volume(cubic metres): 3 cum constructional parameters: size of front tyres (mm):as per oem, size of rear tyres (mm): as per oem, size of wheel (mm): as per oem, tipper body pivot length (mm): max 2200mm, tipper body length (mm): max 3000mm, tipper body height (mm): max 1100 mm, overall height of tipper from ground (mm): max ht of 2000mm, body plate thickness (mm): 3 and 2 mm main frame thickness (mm): 3mm, hydraulic system: yes, tipping hydraulic cylinders(make): reputed make, hydrau