bids are invited for switch amplifier, 1 840981305 solenoid driver make: pepperl + fuchs model: kcd0-sd3-ex1.1045 features: • 1-channel isolated barrier • 24 v dc supply (loop powered) • current limit 45 ma at 10 v dc • test pulse immunity • housing width 12.5 mm • up to sil 3 acc. to iec/en 61508 4 number 2 840981306 switch amplifier: make: pepperl + fuchs model: kfd2-sr2-ex1.w.lb features: • 1-channel isolated barrier • 24 v dc supply (power rail) • dry contact or namur inputs • usable as signal splitter (1 input and 2 outputs) • relay contact output • fault relay contact output • line fault detection (lfd) • reversible mode of operation 20 number total quantity : 52 3 840981307 universal temperature converter make: pepperl + fuchs model: kfd2-ut2-ex1 features: • 1-channel isolated barrier • 24 v dc supply (power rail) • thermocouple, rtd, potentiometer or voltage input • current output 0/4 ma ... 20 ma • sink or source mode • configurable by pactware • line fault (lfd) and sensor burnout detection • up to sil 2 acc. to iec/en 61508 / iec/en 61511 5 number 4 840981308 frequency voltage current converter make: pepperl + fuchs model: kfu8-fssp-1.d features: • limit frequency 40 khz • voltage/current output:0 ...10 v dc; 2 ... 10 v dc; 30 ma/0 ... 20 ma; 4 ... 20 ma; • incrementing output (spacing factor 1 ... 9999) • multi-range power pack • 2-, 3-, 4-wire and namur sensors as well as rotary encoder connectable • auxiliary power output for sensors • connection via power rail • period measurement • display: input in hz or 1/min, output in v or ma • adjustable updating 4 number 5 840981311 smart transmitter power supply make: pepperl + fuchs model: kfd2-stc5-ex1.2o features: • 1-channel isolated barrier • 24 v dc supply (power rail) • input 2-wire and 3-wire smart transmitters and 2-wire smart current sources • signal splitter (1 input and 2 outputs) • dual output 4 ma ... 20 ma current sink/current source • terminals with test points • up to sil 2 (sc 3) acc. to iec/en 61508 10 number 6 840981312 make: pepperl + fuchs model : kfd2-stc5-ex1 • signal type: analog input • supply • rated voltage: 18 - 30 v dc • connection: power rail or terminal • input : input 2-wire and 3-wire smart transmitters and 2-wire smart current sources • input signal: 0/4 -20 ma • input resistance: max. 265 ω terminals 2-, 3 , max. 330 ω terminals 1 +, 3 • output load: 0 - 800 ω • output signal: 0/4 -20 ma (overload > 25 ma) • ripple max.: 50 μa rms • external supply (loop) : 2 - 30 v dc • degree of protection : ip20 • safety integrity level : sil 2 • dimension: 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) • mounting: on 35 mm din mounting rail ( en 5 number 7 840981313 make: pepperl + fuchs model: kfd2-scd2-ex1.lk • signal type : analog output • supply rated voltage: 19 ... 30 v dc • connection: power rail or terminal • input connection side: control side • voltage drop: approx.6 v at 20 ma • input signal: 4 ... 20 ma , limited to approx. 30 ma • output connection side : field side • voltage: ≥ 13 v at 20 ma • current: 4 ... 20 ma • load: 100 ... 650 ω 4 number