work for laying of lt ab cable & supply of its associated decentralized material in 33 / 11 kv sub station 20 no., bazpur road, kashipur at different sites under edsd kashipur ( town ) under the head s.i.-2 stay clamp made of ms flat for pcc pole 8.5mtr of size 50x6 sqmm duly red oxide painted with suitable size with fitted nut and bolts and washer as per specification of upcl 3 smc 3 phase lt distribution box with inbuilt panel lock, al bus bar ryb 25x6mm, al busbar n 40x6mm ( sintex make or other iso reputed company ) 4 dead end clamp with i hook as per upcl specifications 5 suspension clamp with i hook as per upcl specifications 6 ms clamp made of ms flat for pcc pole 8.5mtr of size 35x5 sqmm duly red oxide painted with suitable size with fitted nut and bolts and washer for lt distribution box as per specification of upcl 7 ms clamp made of ms flat for pcc pole 8.5mtr of size 50x6 sqmm duly red oxide painted with suitable size with fitted nut and bolts and washer for dead end as per specification of upcl 8 ms clamp made of ms flat for pcc pole 8.5mtr of size 50x6 sqmm duly red oxide painted with suitable size with fitted nut and bolts and washer for suspension as per specification of upcl 9 insulated piercing connector body molded from high quality mechanical climate and uv resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth abc size line to line taping 120sqmm to 120 sqmm / 95 sqmm tyco / rpg / 3m make 10 insulated piercing connector body molded from high quality mechanical climate and uv resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth abc size for line to db taping 120sqmm to 120 sqmm tyco / rpg / 3m make. 11 lt bare neutral connectors pg clamp 95sqmm - 25 sqmm single bolt as per upcl specifications ( for line to db ) 12 ltbare neutral connectors pg clamp 95sqmm - 25 sqmm double bolt as per upcl specifications ( for line to line ) 13 lug size o type 25 mm ( for connecting cable pvc 4x25 ) 14 lug size o type 95 / 120 mm ( for connecting ab to t / f per t / f 4nos ) 15 labour charges for laying of arial bunch cable 16 cartage of pcc pole from store center kashipur / haldwani / rudrapur to work site with stacking site in 1km distance, including loading & unloading ( distance 5 km to 30 km ) 17 cartage of small line material from store center kashipur / haldwani / rudrapur to work site incliding, loading & unloading ( distance 5 km to 30 km ) 18 head load cartage of pcc pole from road to work site ( rate as per 1 pole / km. ) 19 head load cartage of small material from j.e store to work site rate as per km. / quintleincluding loading and unloading. 20 excavation of earth for pole pit of size 0.9x0.6x1 / 6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work 21 erection charges of pcc pole in long span as per upcl norms 22 grouting of pole in size 0.45x0.45x1 / 6 of the support in cc ratio 1:4:8 ( 1 cement :4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of cement, sand andstone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per resspo construction manual. 23 excavation of earth for stay pit of size 0.6x0.6x1.2mtrin all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work 24 fixing , tightening and nozzaling of lt stay with pole and stay rod on required tension as per drawing / resspo manual. 25 grouting of stay in size 0.6x0.6x0.3 in cc ratio 1:4:8 ( 1 cement :4 graded stone 20mm nominal size: 8 coarse sand ) block including cost of cement, sand andstone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per resspo manual. 26 earthing of support with m.s. esrth rod of 2.5 meter long by hammaring of m.s. rod to proper depth and connecting the earth electrode with the help of g.i. wire as per construction manual. 27 removing & reconnection of single fhase lt consumer service connection 28 removing & reconnection of three fhase lt consumer service connection 29 dismantling of old acsr conductor weasel from esisting lt line including re rolling cartage from site work to electrical store center, kashipur 30 lt line 3?4 wire 31 lt line 3?3 wire 32 laying, strining & sagging of abc cable including fixing of insulated piercing connector, ded end clamps with eye hook, suspention clamp, with eye hook in all complete work. 33 laying & fixing insulated cable lt xlpe alu. cond. power cable 4x25 sqmm 34 installation of l.t.distribution board complate work. 35 fixing of dead end clamp with m.s.clamp. 36 fixing of suspension clamp with m.s.clamp. 37 fixing of shear head type insulated piercing connector suitable for jumphering for line to line taping 120 / 95 to 120 / 95 sqmm. 38 fixing of shear head type insulated piercing connector suitable for jumphering for line to db taping 120 / 95 to 16 / 25 sqmm. 39 fixing of l.t.bare neutral connectors pg clamp 95 / 70 sqmm to 95 / 70 sqmm line to line. 40 fixing of l.t.bare neutrel connectors pg clamp 95 / 70 sqmm to 95 / 70 sqmm line to box.