laying of lt ab cable & supply of its associated decentralized material in 33 / 11 kv sub station patrampur different sites under edsd jaspur ( rural ) under edd jaspur.-2 supply of stay clamp for pcc pole made of m.s. flate size 50x6 mm duly red oxide painted with fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. ( as per specification & drawing of upcl ) 3 supply of lt shackle insulator size 75x90 mm with one no nut & bolt 150x16 mm made of best quality pore line and without defeets isi standard. ( as per specification & drawing of upcl ) 4 supply of m.s. half clamp for pcc pole made of m.s. flate size 35x5 mm duly red oxide painted with fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for fixing of lt distribution box. ( as per specification & drawing of upcl ) 5 supply of smc three phase l.t. distribution box for connection of lt consumer with in built panel lock with key, al bus bar ryb 25x6 mm & al bus bar n 40x6mm. make- ( sintex / other is complied reputed company ) 6 supply of m.s clamp for pcc pole made of m.s. flate size 50x6 mm duly red oxide painted with fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for dead end clamp. ( as per specification & drawing of upcl ) 7 supply of m.s clamp for pcc pole made of m.s. flate size 50x6 mm duly red oxide painted with fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for suspension clamp. ( as per specification & drawing of upcl ) 8 supply of shear head type insulated piercing connector body moulded from high quality mechanical climate and uv resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth abc size 120 sq mm to 120 sq mm / 95 sq mm.make- ( tyco / rpg / 3m / sicame / ensto ) 9 supply of shear head type insulated piercing connector body moulded from high quality mechanical climate and uv resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth abc size 120 sq mm to 25 sq mm.make- ( tyco / rpg / 3m / sicame / ensto ) 10 supply of dead end clamps with i hook. ( as per specification & drawing of upcl ) 11 supply of suspension clamps with i hook. ( as per specification & drawing of upcl ) 12 supply of l.t. bare neutralconnectors pg clamp 120 sq mm to 25 sq mm single bolt. ( as per specification & drawing of upcl ) 13 supply of l.t. bare neutralconnectors pg clamp 120 sq mm to 120 sq mm double bolt. ( as per specification & drawing of upcl ) 14 supply of aluminum lugs o type size 25 mm for connecting pvc cable 4x25 sq mm. ( as per specification & drawing of upcl ) 15 supply of aluminium lugs size 120 sq mm made of best quality pore line and without defeets isi standard. ( as per specification & drawing of upcl ) 16 aerial bunch cable laying work 17 cartage of the following material by private truck from store centre rudrapur / haldwani / kashipur to work site dump store approx. distance 10 to 80 km. including loading and unloading into truck. 18 pcc pole 8.5 meter long 19 small line material including conductor & other 20 cartage of small line material from dump store to work site approx. distance 5 km. including loading and unloading. 21 pcc pole 8.5 meter long 22 small line material including conductor & other 23 erection of following pole after digging of pit size 0.6×0.6 mtrs & 1 / 6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per specification of upcl. 24 single suppourt of pcc pole 25 straightening of tilt / leaning pole by diigging of pit around the pole and refilling the same by stone and soil and with the help of manpower / turfer 26 fixing of grouting of stay set complete as per respo drawing no. res-16 with stay rod 16×1800 mm stay wire 7 / 10 swg including excavation of earth and grouting of stay in pit with cc 1:4:8 in bottom of pit in size 0.60×0.60×0.60 mtrs, including cost of cement, sand and stone ballast etc. fixing of all accessories complete in all respect as per specification of upcl. 27 fixing of m.s. earthing rod 20×2500 mm for earthing of support as per respo drawing no. res-12 including digging earth rod 2.5 m deep below ground level connected to support with earth wire 7 / 16 swg fixing of all accessories complete in all respect as per specification of upcl. 28 dismantling of old acsr conductor from existing lt line including re- rolling back its conductor, wire, clamp, insulator, any other wire or items etc.including stacking and transportation of material to the upcl central stores 2-40 km. 29 3 phase 4 wire 30 2 phase 3 wire 31 1 phase 2 wire 32 labour charges for disconnection offollowing l.t.consumer service connection. 33 single phase consumer 34 three phase consumer 35 labour charges for re-connection offollowing l.t.consumer service connection. 36 single phase consumer 37 three phase consumer 38 laying, stringing and sagging of lt a.b cable size ( 3x120+1x95 ) / ( 3x95+1x70 ) including fixing of insulated piercing connector, dead end clamps with i hook, suspention clamp, holding clamps, etc. complete in all respect as per specification of upcl. 39 fixing of l.t. distribution box in all respect. 40 laying and fixing insulated cable 4x25 sq mm insulated lead. 41 fixing of dead end clamp with m.s clamp. 42 fixing of suspension clamp with m s clamp. 43 fixing of shear head type insulated piercing connector for line to line taping 120 sq mm to 120 / 95 sq mm 44 fixing of shear head type insulated piercing connector for line to box taping 120 / 95sq mm to 25 sq mm 45 fixing of l.t. bare neutralconnectors pg clamp line to line120 sq mm to 25 sq mm. 46 fixing of l.t. bare neutralconnectors pg clamp line to box 120 sq mm to 120sq mm.