annual plan-vamanapuram bp construction of mele madathara samskarika nilayam in peringamala gp-13 / 2023-24-general civil work; 2 2.6.1:earth work in excavation by mechanical means ( hydraulic excavator ) / manual means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.all kinds of soil 3 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size ) 4 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 ( 1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 5 5.2.2:reinforced cement concrete work in walls ( any thickness ) , including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) 6 5.3:reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0< / sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) . 7 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 8 5.9.6:centering and shuttering including strutting, etc. and removal of form for:columns, pillars, piers, abutments, posts and struts 9 5.9.3:centering and shuttering including strutting, etc. and removal of form for:suspended floors, roofs, landings, balconies and access platform 10 5.9.5:centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 11 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 12 50.6.1.8:solid block masonry using pre cast solid blocks ( factory made ) of size 40x20x15cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level with thickness 15cm in: cm 1:6 ( 1 cement : 6 coarse sand etc complete 13 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand ) 14 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand ) 15 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand ) 16 50.9.1.1:providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately ) , using good quality anjili wood / jack wood 17 50.9.3.1:providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f engineer in- charge. using anjili / jack wood 18 50.9.4.1:providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured ) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality anjili / jack wood 19 50.9.6.1:providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. using anjili wood / jack wood 30 mm thick shutters 20 9.48.2:providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to openings / wooden frames with rawl plugs screws etc 21 11.36:providing and fixing i st quality ceramic glazed wall tiles conforming to is : 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer -in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 22 11.37:providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) , of 1st quality conforming to is : 15622, of approved make, in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , including pointing the joints with white cement and matching pigment etc., complete. 23 11.41.2:providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 24 13.46.1:finishing walls with acrylic smooth exterior paint of required shade:new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 25 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 26 9.63.1:providing and fixing isi marked oxidised m.s. tower bolt black finish, ( barrel type ) with necessary screws etc. complete:250x10 mm 27 9.53:providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) 28 9.100.1:providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 29 50.9.15.5:providing and fixing iron hooks and eyes: 100 mm 30 50.17.1.4:supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 31 50.18.8.2.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chased and making good the wall etc. 20 mm pipe 12 kgf / cm2 32 50.18.8.3.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf / cm2 33 50.18.8.4.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10kgf / cm2 34 50.18.8.5.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf / cm2 35 50.18.8.9.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf / cm2 36 51.19.st2:supplying and installing ready made pvc septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge ( provision for cc / rcc / sand / 06mm aggregate for the preparation of bed shall be paid separately )
2. 15 to below 25 flush capacity 37 18.51.1:providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15 mm nominal bore 38 50.18.9.22.1:providing and fixing pvc moulded fittings / accessories for rigid pvc pipes, including jointing with pvc solvent cement - 110 mm dia elbow 39 50.18.9.22.3:providing and fixing pvc moulded fittings / accessories for rigid pvc pipes, including jointing with pvc solvent cement-110 mm dia door elbow 40 50.18.9.22.4:providing and fixing pvc moulded fittings / accessories for rigid pvc pipes, including jointing with pvc solvent cement- 110 mm dia bend 41 od225165 / 2023-2024:supplying and fixing pvc door 42 od225166 / 2023-2024:supplying and fixing cc rings of dia 0.9m 43 16.68:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge. 44 od225167 / 2023-2024:supplying and fixing granite name board 75*50cm size on a brick wall with engraving letters as per direction of deptl engineers</sup>