tender for furniture arrangement of skill development center for maharashtra animal and fishery sciences university nagpur partial work , furniture arrangement-partial work , executivestable @ 1800lx900dx750ht providing & fixing of table @ 1800lx900dx750ht - top & gable end to be made of laminate 1 mm ?hick of approved quality andjustdialmediumdensity fiber board (mdf) sheet d 18 mm thick finish with soft water fall edges & curved panel & decorated anodized section modesty panel to be made of 18 mm thick mediumdensity fiber board with pvc edge band as per drawing and design provided. the drawer made from 18 mm plywood and having good quality of channels asembly. etc complete. , credestal @ 1200lx450lx650ht providing & fixing of low height credestal @ 1200l x 450d x 650h :- to be made out of laminate 1 mm thick finish ( 2 openable shutter & 3 drawer pedestal in between )drawers as per drawing made in 18 mm mediumdensity fiber board (mdf)and the drawer channel,locks,s.s.handelof approved, should branded and properlyfixed in position etc completeas per drawing , pedestal unit @ 420lx450dx650ht providing & fixing of pedestal @ 420lx450dx650ht :- to be made out of complete laminate 1mm thick on 18 mm mediumdensity fiber board (mdf)the acefinish consist of three drawers as per drawing made in 18 mm mediumdensity fiber board (mdf)and the drawer channel ,locks,should branded and properly fixed in position etc complete , single bed @ 2025lx 1000dx 650hproviding and fixing single bed of size 2025lx1000dx650h with. understructure: the legs are made of square tube of size 25 x 25mm made out100 mm made up of ms with a thickness of 2 mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and headboard to the leg. three nos. of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size 25 x 25mm made out of ms with a thickness of 2.00mm. the middle horizontal stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this leg is also made of square tube of size 25 x 25mm made out of ms with a thickness of 2 mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft.side panel: - the side panels are made up of 18mm thick prelam mm mediumdensity fiber board (mdf)with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the overall width of the side panel is 150mm. the side panels have 18mm thick mm mediumdensity fiber board (mdf)baton running for required length to add rigidity to the structure. head board :- the head board is made up of 18mm thick mm mediumdensity fiber board (mdf) with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 650mm. foot board :- the foot board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 450mm. bed base: - the bed base is made up of 12mm thick mediumdensity fiber board (mdf) with both side white laminate.g with brown and cream leathershould be placed with proper adhesives etc complete