repair and painting of steel furniture under ge chandigarh- 1 table steel 3x3 ( fd-1009): taking out old unserviceable existing top from table steel 3x3 and s&f of new top made of 18 mm thick pre laminated particle boardexterior grade with 4mm thick teak wood beading around the top complete all as specified and directed by engr-in-charge. 2 m&l for welding of broken frame steel of table 3x3steel as specified in drg and as directed by engr-in-charge. 3 s&f of 25 mm sq ms tube 1.6 mm thick 1100 mm long cross stiffener to table steel 3x3, 8” (inch) below from top frame by welding rest all as directed by engr-in-charge. 4 removing of unserviceable pvc shoes of table steel3x3 and s&f of new pvc shoes of the same shape and size rest all as per drg and directed by engr-in-charge. 5 almirah large steel/med steel with shelves &1/2h &1/2s large steel /med steel ( fd-1031 to 1034 & fd-114): taking out existing unserviceable locks almirah large/medium steel and s&f of new locks of six leavers of existing shape & size with duplicate keys of make : godrej /harrison complete all as specified and directed. 6 taking out broken/damaged handle of steel almirah and s&f of new handle of mild steel chromium plated of existing shape complete all as specified and directed. 7 taking down existing unserviceable shelves of almirah large steel and s&f of new shelves made of 1mm thick mild steel of existing shape and size complete allas specified on drawing and directed. 8 all as per item 07 here in before but shelves of almirah medium steel. 9 taking out old unserviceable door hinges from almirah large/medium steel and s&f of new doorhinges mild steel 75/80 mm long complete all asspecified and directed. 10 taking down unserviceable cover locks from almirah large/mediumsteel and s&f of new cover locks made of 1mm thick mild steel of existing shape and size complete allas specified on drawing and directed. 11 taking down unserviceable locking device & rod set from almirah large steel and s&f of new locking device & rod set of existing shape and size complete allas specified on drawing and directed. 12 all as per item 11 here in before but locking device & rod set of almirah medium steel. 13 dismantling of unserviceable legs of almirah large steel and s&f of new made of 1mm thick mild steel sheet of existing shape and size complete all as specified on drawing and directed. 14 all as per item 13 here in before but legs of almirah medium steel. 15 locker steel ( fd-1029 & fd-257): removal of handle of locker steelor similar mes pattern or similar items carefully without disturbing the adjoining parts and s&f new handle in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, welding, glueing,providing hinges, placingevery part in-tact and polishing/painting the disturbed portion, as applicable as per drgs or as directed by engr-in-charge. 16 all as per item 15 here in before but hasp & staple 17 all as per item 15 here in before but shelves 18 all as per item 15 here in before but cp hanging rod 19mm dia 19 all as per item 15 here in before but leg 20 chair computer (tp)( fd/e6/map/01) : taking out old unserviceable seatand s&f new seat as per drawing 21 taking out old unserviceable back and s&f new back as per drawing. 22 taking out old unserviceable arms and s&f new arms as per drawing. 23 taking out old unserviceable hydrolic system and s&f new hydrolic system as per drawing. 24 removing the unserviceable base of chair computer and s&f new base c.p. as exist with wheels all as specified and directed by engr-in-charge 25 taking out old unserviceable coaster wheel and s&f new coaster wheel as per drawing. 26 chair revolving executive (tp) : taking out old unserviceable seatand s&f new seat as per drawing. 27 taking out old unserviceable back and s&f new back as per drawing. 28 taking out old unserviceable arms and s&f new arms as per drawing. 29 taking out old unserviceable coaster wheel and s&f new coaster wheel as per drawing 30 taking out old unserviceable hydrolic system and s&f new hydrolic system as per drawing 31 removing the unserviceable base of chair revolving and s&f new base c.p. as per existing pattern with wheels all as specified and directed by engr-in-charge 32 chair visitor/chair cba cushioned chair writing map( fd/e6/map/12 & tp):taking out old unserviceable seatand s&f new seat as per drawing. 33 taking out old unserviceable back and s&fnew back as per drawing. 34 taking out old unserviceable arms and s&f new arms as per drawing 35 all as per item 34 here in before but chair writing map 36 all as per item 34 here in before but chair writing map 37 charpoy ip folding ply top(fd-1119): removing the existing unserviceable plywood from charpoy and s&f new 8/9mm thick plywood commercial with screws and cup washer all as specified and directed. 38 removing unserviceable hard rubber shoes of charpoy folding and s&f new hard rubber shoes all as specified and directed. 39 chair school with hand board (fd/e6/map/05) : removing the existing unserviceable pvc seat from chiar and s&f new pvc seat with complete fitting as per shown in drg and directed by engr-in-charge. 40 removing the existing unserviceable hand board with bracket from chair and s&f new 18mm thick particle hand board white on one side and other side teak face with bracket made to shape with 4mm thick beading all round all as specified and directed. 41 removing unserviceable hard rubber shoes of chair school and s&f new hard rubber shoes all as specified and directed 42 table dinning ors (fd-165(m): removing the existing unserviceable legs of table and s&f new legs made out of 25mm ms square pipe.1.6mm thick duly welded to frame all as specified and directed. 43 all as per item 42 here in before but short rails 44 all as per item 42 here in before but long rails 45 taking out old unserviceable top of table dining orand s&f new top of prelaminated particle board 18 mm thick exterior grade with 4 mm thick teak wood beadingaround the top, complete all as shown in drg and directed by engr-in-charge . 46 s&f of newrubber shoes to be table dinning ors all as specified on drawing 47 table bedside (map)(fd/e6/map/15(r): removing the existing unserviceable prelaminated particle board from top of bedside, s&ffrom new 18mm thick prelaminated particle board ext gde isi marked one side teak faced all as specified and directed. 48 all as per item 47 here in before but from bottom side of table bedside isi marked 49 all as per item 47 here in before but from sides of table bedside isi marked 50 removing the existing unserviceable plywood from back side of bedside ands&f new 6mm thick plywood commercial all as specified and directed. 51 removing the existing unserviceable upper drawer made out of prelaminated particle board from bedside, s&f new drawer made out of 18mm thick prelaminated particle board one side teak faced with drawer bottom of 6mm thick plywood all as specified and directed. 52 all as per item 51 here in before but lower drawer 53 s&f new handle for table bedside as per existing model/design all as specified and directed 54 bed plywood top (map)(fd/e6/map/08(r) : removing the existing unserviceable prelaminated particle board from head rest of bed and s&ffrom new 18mm thick prelaminated particle board both side teak faced ext gde isi marked all as specified and directed by engr-in-charge 55 all as per item 54 here in before but foot rest. 56 removing the existing unserviceable ms square pipe stiffeners from bed, and s&f new 25mm square pipe 1.6mm thick all as specified and directed 57 removing the existing unserviceable ply top from bed ands&f new 12mm thick ply with suitable screws all as specified and directed 58 removing the existing unserviceable hard rubber shoes from bed and s&f new hard rubber shoes to the legs of bed all as specified and directed 59 table computer(map)(fd-27, fd-28 & fd-33): taking out old unserviceable top of table computer and s&f new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beadingall round the top complete all as shown in drg and directed by engr-in-charge . 60 refiting the complete structure with pvc clamp piono type hinges, rubber shoe ,screws and washer to make it funtionel after tightening the loose parts all as shown on drawing. 61 s&f new sliding channel of key board all shape and size as shown in drawing. 62 painting : preparing the old painted surfaces by sand papering/ derusting, painting with white/ olive green synthetic enamel paint one coat to give glossy finish for almirah large steel all as specified and directed. 63 all as per item 62 here in before but almirah med steel. 64 all as per item 62 here in before but locker steel. 65 all as per item 62 here in before but bed plywood top (map). 66 all as per item 62 here in before but table bedside (map). 67 all as per item 62 here in before but teapoy verandah. 68 all as per item 62 here in before but table dining ors. 69 all as per item 62 here in before but table 900x600 with drawer. 70 all as per item 62 here in before but table 900x600 without drawer. 71 all as per item 62 here in before but table 900x900mm. 72 all as per item 62 here in before but table office clerk steel. 73 all as per item 82.00 here in before but table office officers steel. 74 all as per item 62 here in before but charpoy ip folding ply top. 75 all as per item 62 here in before but chair school with hand board. 76 all as per item 62 here in before but chair visitor/chair cba cushioned. 77 all as per item 62 here in before but rack adjustable steel 6/4 tier 78 all as per item 62 here in before but rack side steel with tray. 79 all as per item 62 here in before but shoe rack steel. 80 all as per item 62 here in before but trestle store room steel 81 all as per item 62 here in before but chair writing map 82 welding to broken parts of steel items e.g. charpoy gi pipe, chairs cb steel, tables and other items as directed by engr-in-charge. note :- welding portion should be done by gas welding. 83 table office officers steel ( fd-1002) : s&f of new top for table office officer steelpre laminated particle board 18 mmthick exterior grade with 4mm thick teak wood beading around the top including removing old u/s top of table complete all as specified and directed by engr-in-charge. 84 s&f new drawer for table office officer steel made of 1mm thick pbi sheet ,rest all as per drg including removing old u/s drawer of table complete all as specified and directed by engr-in-charge. 85 s&f new legfor table office officer steel made of pbi sheet 1.6mm thick 25mm square conduit pipe and painted with synthetic enameled paint og rest all as per drg including removing old u/s leg of table complete all as specified and directed by engr-in-charge . 86 all as per item no. 85 above but long rails 87 all as per item no. 85 above but short rails 88 s&f new 6 lever ms lock for table office officer steel of approved quality with duplicate keys including removing old u/s lock of table all as specified and directed. 89 s&f of new pvc shoes for table office officer steel of the same shape and size rest all as per drg including removing old u/s pvc shoes of table all as specified and directed. 90 table office clerk steel( fd-1004) : removing old unserviceable top of table office clk steel and s&f of new top of pre laminated particle board 18 mmthick exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed engr-in-charge. 91 taking out unserviceable drawer of table office clk steeland s&f new drawer made of 1mm thick pbi sheet ,rest all as per drgand directedby engr –in-charge. 92 removing unserviceable damaged legs and s & f new legmade of pbi sheet 1.6mm thick 25mm sqre conduit pipe and painted with synthetic enameled paint og rest all as per drg and directed by engr-in-charge. 93 all as per item no. 92above but long rails. 94 all as per item no. 92above but short rails. 95 removing the unserviceable lock from table and s&f new 6 lever ms lock of approved quality with duplicate keys all as specified and directed. 96 removing of unserviceable pvc shoes of table office clksteel and s&f of new pvc shoes of the same shape and size rest all as per drg and directed by engr-in-charge 97 table steel 3x2 with drawer and w/o drawer ( fd-1008 & fd 1007): taking out old unserviceable existing top from table steel 3x2 with drawer/ w/o drawer and s&f of new top made of 18 mm thick pre laminated particle boardexterior grade with 4mm thick teak wood beading around the top complete all as specified and directed engr-in-charge. 98 taking out unserviceable drawer of table 3x2 steel with drawer and s&f new drawer made of 1mm thick pbi sheet duly painted with two coats of og synthetic enamel paint over a coat of red oxide primer paint , rest all as per drgand directedby engr –in-charge. 99 removing unserviceable damaged legs and s & f new legmade 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint ogover a coat of red oxide primer,rest all as per drg and directed by engr-in-charge 100 all as per item no. 99 above but long rails 101 all as per item no.99 above but long rails 102 m&l for welding of broken frame steel of table 3x2 steel as specified in drg and as directed by engr-in-charge. 103 removing of unserviceable pvc shoes of table steel 3x2 with drawer and s&f of new pvc shoes of the same shape and size rest all as per drg and directed by engr-in-charge(ii) makes for above items : ply wood : archid/ century/ kitply paint : asian/ nerolac/ johnson nicholsonprelaminated board : archidlam/ kitlam/ novopan/ lock : harrison/godrej/link, gi pipe : tata/ jindal/ swastiknylon newar: usha/ evershine/ bonusplastic cane : shah/ premier/ arihant,mirror : atul/ modigaurd/ saint gobinwood : shisham/ teak woodlaminated sheet : formica/ marrino/ kitmica/ centuryfoam : mm foam/ kurlon/ sleep well