tender for special repair to internal road near bldg no. p-5 to p-18 at manekshaw enclave under ge ( east ) agra; 1 repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming ( including supply of road metal ) complete all as specified and directed. 2 m&l for preparation of existing black top road surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed 3 m&l for applying evenly a priming / tack coat with mechanical sprayer over old black top surfaces with paving bitumin vg-10 at 5kg per 10 sq metre complete all as specified and directed. 4 m&l for 30 mm thick ( consolidated average thickness ) bituminous premix asphaltic semi dense concrete with 5.5% binder of paving bitumen of vg-30 grade content by weight of total mix, rolled & compacted with 08 to 12 tonne power road rolled to required camber and gradient complete all as specified and directed ( laying of bituminous premix asphaltic semi dense concrte with mechanical paver ) complete all as specified and directed. 5 supply and fixing in repair metal tubular dealineatormade out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of pmma and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4, type b-1 ( using 20 mm graded stone aggregate ) of size ( 150x150x300mm ) complete all as specified and directed. 6 s&f of cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with pama striplens reflector of model no. da 972 fixed with and including ms stud of suitable size as per manufacturers instructions complete all as specified and directed. 7 m&l for preparation of road surface and applying hot thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a arrow dashes, letters etc, on road or pavement with using retro reflective thermoplastic road marking paintof white or yellow colour approved make applied with machine all as per manufacturers instructions & colour as directed by ge complete all as specified and directed. 8 demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 9 m&l for pcc 1:2:4, type b-0 ( using 12.5 mm graded stone aggregate ) ditto in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, stripig courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, filling and embeeding of kerbs and delineaters, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.