supply of materials for the construction of anganwadi no. 13 in ward 12 under mgnregs supply of materials for the construction of anganwadi no. 13 in ward 12 under mgnregs , supply of materialsfor the construction of anganwadi no. 13 in ward 12under mgnregs , stone for masonry work , through and bond stone size 24x24x39cm , portland cement , coarse sand(zone iii) , structural steel such as tees, angles, channels and r.s.joists , red oxide zinc chromate primer , adjustable telescopic prop 3 m (2.02-3.75 m) , beam clamp 300-380 mm(450-1070 mm) , stone aggregate (single size) : 20 mm nominal size , stone aggregate (single size ):10 mm nominal size , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , solid blocks of size 30x20x15 cm , second class kail wood in planks , second class kail wood in scantling , hollock ballies 125 mm diameter , adjustable span eso + si (2.35-3.40) , twisted steel / deformed bar , anjili wood scantls , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butt hinges 50x37x1.50 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , anjili wood planks , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , factory made door frame size 50x47 mm withwall thickness 5 mm made of single piece extruded profile , 35 mm thick factory made solid panel pvc door shutter of single piece extruded profilenon decorative finished (matt finished) , powder coated m s butt hinges 100 mm x 58 mm x 1.9 mm , fine sand (zone iv) , mild steel round bar above 12 mm dia , flats up to 10 mm in thickness , polyethylene water storage tank with cover and suitable locking arrangement , iron hooks & eyes 100mm , vitreous china flat back wash basin 550x400 mm , 15 mm c p brass tap , c p brass waste 32 mm , c.i bracket for wash basin and sinks , 200 mm aluminium aldrop , brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles , anodised aluminium tower bolt (barrel type) 200x10 mm , chromium plated brass screws 30 mm , anodised aluminium handles 125 mm with plate 175x32 mm , chromium plated brass screws 25 mm , pvc pipe 110 mm outer dia 6 kgf/cm2 , pvc pipe 25 mm outer dia. 10 kgf/ cm2 , pvc pipe 20 mm outer dia 12 kgf/cm2 , pvc pipe 50 mm outerdia 6 kgf/cm2 , black plastic seat (solid) with lid c p brass hinges and rubber buffers , vitreous china pedestal type wate closet , flushing cistern pvc 10 lts capacity (low level)(white) (with fittings, accessories and flush pipe) , semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than700 mm i/c pvc waste fittings , stainless steel kitchen sink - without drain board470 x 420 mm bowl depth 178 mm , stone aggregate (single size) : 40 mm nominal size , vitrified floor tile 60x60 cm , ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and design except burgundy, bottle green black , pink primer (for wood) , deharadun white lime , plastic emulsion paint , synthetic enamel paint in black or chocolates shade , mild steel tubes hot finished welded type , welding by electric plant , pvc pipe 63 mm outer dia 4 kgf/cm2 , brass stop cock 15 mm dia , c.p brass angle valve 15 mm , ptmt - soap dish/holder 138x102x75 mm , g.i. pipes40 mm dia , mild steel plates , epoxy paint