purchase of benches for university college, cdlu, sirsa purchase of benches for university college, cdlu, sirsa , o3 seater benches comprising following specifications: ( rates for mdf boards are invited ) ( a ) metal frame consists of 1”x1” square pipe of crc 16 gauge. the writing shelf / desk–top provided with slight angle for the comfort of students and also inclined angle back for backrest of students. the overall length of this desk-cum- bench with mdf board is 4’ and height of desk-top is 32” including mdf board thickness and seat height is 20” including mdf board thickness. the total vertical legs are 8 in number out of which 4 no. of legs with base pvc shoe touch the ground. the 2-2 horizontal pipes are also provide for rigidity and fitting of plywood with frame. the 2 nos. of longitudinal foot rest supports are also provided with 1”x1” square pipe of 16 gauge crc pipe. mig welding is used to make this frame and is painted with power coated paint. the space b / w desk-top and seat is adjusted such that student can easily enter / exit into the bench. ( b ) the desk-top, seat and back are made with 17 / 18mm mdf board having length of each is 48” and width of each is 16”, 12” & 9.5” respectively. all border of mdf board are covered / furnished with mechanically pasted 2mm thick edge-binding tape. ( c ) the fitting of mdf board with metal frame with screws and at least 8 screw are used of fit one ply ( desk-top, seat and back ) . , 03 seater benches comprising following specifications: ( a ) metal frame consists of 1”x1” square pipe of crc 16 gauge. the writing shelf / desk–top provided with slight angle for the for the comfort of students and also inclined angle back for backrest of students. the overall length of this desk-cum- bench with plywood is 4’ and height of desk-top is 32” including plywood thickness and seat height is 20” including plywood thickness. the total vertical legs are 8 in numbers out of which 4 no. of legs with base pvc shoe touch the ground. the 2-2 horizontal pipe are also provide for rigidity and fitting of plywood with frame. the 2 nos. of longitudinal foot rest supports are also provided with 1”x1” square pipe of 16 gauge crc pipe. mig welding is used to make this frame and is painted with powder-coated paint. the space b / w desk-top & seat is adjusted such that student can easily entre / exit into the bench. ( b ) the desk-top, seat and back are made with 18mm thick plywood having length of each is 48” and width of each is 16”, 12” & 9.5” respectively. the plywood is furnished with 8mm sanmica sheet and all border of ply are cover / furnish with mechanically pasted 2mm thick edge-binding tape. ( c ) the fitting of plywood with metal frame with screws and at-least 8 screw are used of fit one ply ( desk-top, seat and back.