providing following materials for work 2 at limpangaon providing following materials for work providing paving blocks at shrigonda factory lingaleshwar temple at limpangaon tal shrigonda dist ahmednagar , providing following materials for work providing paving blocks at shrigonda factory lingaleshwar temple at limpangaon tal shrigonda dist ahmednagar , excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( lift upto 1.5 m. ) bd.a.1 page no. 259 , providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with natural sand / v.s.i. quality artificial sandbd. e. 1 page no. 287 , supplying hard murum / kankar at the road site, including conveying and stacking complete. , spreading hard murum / soft murrum / gravel or kankar for side width complete , providing and fixing heavy duty inter locking concrete rubber mould glossy paving blocks of 60 mm thickness of having a strength of 300 kg / sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. ( using 100% crushed sand ) bd. m-12 page no. 385 , providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge ( 1.25mm ) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation, refilling, transportation, and labour etc complete.spec. no. as directed by engineer in charge morth 801 , compressive strength, water absorption