plant and machinery ( with brief specification ) , ball mill 200kg with porcelain lining. plc, 5h.px1440 r.p.m36”dx36”l , pot mills for 6 pots 3 nos. in one row sr / 3, size 9” dx12” l, 1.5 h.p 1440 r.p.m , electric potter’s wheel. 1 h.p , 90-350 r.p.m, overall size l-15”, b-15” h-16” working plate cast iron of 12” diameter. , pug mill 2h.p, 230v 1440 r.p.m, overall size l-48”, b-17.5”, h-39”, feeding hopper size-8.5”x8.5” size of output mould-120mm. , electric potter’s wheel. 1 / 8 h.p, single phase a.c 230v, working plate cast iron of 12” diameter. overall size l-19”, b-19” h-13 ” , designing wheel ( ceramic ) / turn table. cast iron plate of12” diameter, height to be adjustable. , gas furnace 4x4.5 gas furnace working temperature up to 1250-1300 degree centigrade with digital temperature indicator. outer body made by 3mm thick ms sheet and 40mm angle. inner size-48”x48”x54”, m.s structure, fire clay, high force burner 02 nos., hot face bricks, glass blanket ( murgapa ) , digital indicator with thermo couple-1600 degree centigrade. complete gas operated kiln ( 2nos. high pressure gas burner ) with 4- layered cordierite shelves and 6”, 4” props ( 40 pcs each ) -warranty-5 years.., burner stand-2 nos., gas pipe line attachment etc. , wooden bat / extra plate. green ply ( 1” ) , h-6ftx3 ft wide-1.5 ft., pata size-45 ft.x1.5 ft.-6 nos. , air compressor with touch up spray gun 2 h.p, autometic ( on / off ) , 60 ltrs. , complete pottery tools set for working at cfc sculpture modeling tools, trimming tools, --wooden, pottery trimming tools / pottery tools colour brush-2nos, 4nos, 6 nos, 10 nos, 12 nos-2 sets. , bore well with motor &water storage tank. motor-3h.p, water tank-3 nos, 1000 liters capacity each, pvc pipe 1.5 “ lenth-300 ft. . submersible pump with installation and complete set with all fittings for 10 taps. , power dg set. igreen 62.5 kva-3 phase at 415v, 50hz, 0.8 p.f water cooled three phase std control panel with all accessories and complete installation with canopy.