supply, installation and commissioning of fuel cell bipolar plate cooling system test setup supply, installation and commissioning of fuel cell bipolar plate cooling system test setup , a.plate arrangement: size: 10cm x 10cm, material: graphite, finish: machining as per drawing, quantity: 05 no. b.surface heater: size: 10cm x 10cm, capacity: 50 watts c.water circulating pump: capacity: 0.5 hp, range: 0-2000 lph d.flowmeter: measuring range: 0.002 lph to 50 lph, type: glass tube rotameter, output: 4-20 ma, end connection:1 / 4” bsp, moc: ss304 with glass tube, material process connections and heads: stainless steel head e.pressure sensor: range: -1 to 4 bars, type: diaphragm type, output: 4-20 ma, end connection: 1 / 4” bsp f.temperature sensor: range: -50 to 200 deg c, type: pt-100, size: 6 mm x 100 mm long g.ss tank: material: ss304, capacity: 50 liters with constant temperature arrangement h.pid controller: row 4 digit display, jumper-less selectable j / k thermocouple & rtd pt100 inputs, programmable input signal conditioning, selectable on-off & self tune pid ( with overshoot -inhibit feature ) control, programmable heat / cool control mode, auxiliary control: blower / alarm / compressor with time delay, in-built programmable timer with front / remote start, relay & ssr drive control output version i. process scanner ( daq device ) : no. of channels: 16, range: programmable from 0 to 9999, input: 4 to 20 ma, indication accuracy: 0.25 % of fs, parameter display time: 0 to 99 seconds user programmable j. measuring ranges -pressure: 2x -1…5bar -temperature: 10 x -50…200°c -flow sensor: 1 x 0.002 l / h to 110 l / h -power supply: 230v, 50hz, 1 phase k. warranty three years warranty