supply of consumable glf spares at dr babasaheb ambedkar international airport nagpur , supply of following glf spares to suit the existing installation and as per the list of approved makes, and the material supplied should be in confirmity of latest aai / icao specifications. , isolating transformer 200w 6.6a / 6.6amp for cat / papi , isolating transformer 200w 20a / 6.6amp for runway , 1 mtr secondary lead for runway , essna connector 6 sq.mm. , essna connector 16 sq.mm. , two pin secondary plug assembly for papi ( 2.5 mtr long ) , two pin secondary plug assembly for aun, aln and ald fittings ( 0.3 mtr / 12 long ) , 200 w 6.6a bi-pin halogen lamp , 45w 6.6a bipin halogen lamp for taxi , bi-pin halogen lamp holder for 200w & 45w 6.6amp , 3600 round green filter / spreader lense threshold fitting ( suitable for ama fitting ) . , 1800 red / black filter for hirl fitting ( suitable for ama fitting ) . , bi-directional elevated type high intensity ama aun runway edge light fitting suitable for use with 200w 6.6a halogen lamp complete with all accessories including lamp and lenses and filters and ci base plate. ( hirl fitting ) , supply of following elevated type high intensity uni directional runway threshold / runway end light fittings suitable for use with 100 / 150 / 200w, 6.6a halogen lamp complete with lens clamping mechanism pre-focuslamp holder, central column assembly, breakable coupling, gaskets, two pin secondary lead plugs, base plate with six numbers m-10 stainless steel bolts, spring and plain washers, including 200w halogen lamp with suitable green / red filter as specified and other accessories confirming to icao requirements etc. and as per icao latest amendment complete as required. , green, with 200w lamp ( threshold ) , red, with 200w lamp ( end lights ) , unidirectional elevated type high intensity ama apn approch light fitting suitable for use with 200w 6.6a halogen lamp complete with all accessories including lamp and clear or green spreader lens and ci base plate. ( approach fitting ) , medium intensity elevated type omni directional ama aln taxiway edge light fitting suitable for use with 45w 6.6a halogen lamp complete with all accessories including 133 mm smooth blue lens and lamp and ci base plate. ( mirl fitting ) , supply of ci isolating transformer housing box, water tight round type, metal container of outside size 330 mm dia heigh 450mm made of 10mm thick cast iron moulding all round, expect the top surface, which is 15mm thick, cast iron moulding suitable to receive a light fitting base plate on the top and underground housing associated with transformer power cable and having a clear hole centre at one side surface centre 75mm above bottom surface suitable to supply & receive one no of 50mm dia b class isi mark gi pipe ( as per approved list of make ) , including check nuts as required.the box should have two ss earth bolts of m10 x 30mm tapped inside near the hold ( 4 away from the hold centre ) and having a drain hold at the bottom suitably tapped to receive 15mm dia, b class ci pipe and having clear opening of 220mm at the top surface and 6 nos m10 tapped hole at the hold centre 260mm to receive fitting base plate and bolts as required as per the drawings.